Suppr超能文献

可生物降解塑料在好氧和厌氧垃圾填埋场模型反应器中的降解性。

The degradability of biodegradable plastics in aerobic and anaerobic waste landfill model reactors.

作者信息

Ishigaki Tomonori, Sugano Wataru, Nakanishi Akane, Tateda Masafumi, Ike Michihiko, Fujita Masanori

机构信息

Research Center for Material Cycles and Waste Management, National Institute for Environmental Studies, 16-2, Onogawa, Tsukuba, Ibaraki 305-8506, Japan.

出版信息

Chemosphere. 2004 Jan;54(3):225-33. doi: 10.1016/S0045-6535(03)00750-1.

Abstract

Degradabilities of four kinds of commercial biodegradable plastics (BPs), polyhydroxybutyrate and hydroxyvalerate (PHBV) plastic, polycaprolactone plastic (PCL), blend of starch and polyvinyl alcohol (SPVA) plastic and cellulose acetate (CA) plastic were investigated in waste landfill model reactors that were operated as anaerobically and aerobically. The application of forced aeration to the landfill reactor for supplying aerobic condition could potentially stimulate polymer-degrading microorganisms. However, the individual degradation behavior of BPs under the aerobic condition was completely different. PCL, a chemically synthesized BP, showed film breakage under the both conditions, which may have contributed to a reduction in the waste volume regardless of aerobic or anaerobic conditions. Effective degradation of PHBV plastic was observed in the aerobic condition, though insufficient degradation was observed in the anaerobic condition. But the aeration did not contribute much to accelerate the volume reduction of SPVA plastic and CA plastic. It could be said that the recalcitrant portions of the plastics such as polyvinyl alcohol in SPVA plastic and the highly substituted CA in CA plastic prevented the BP from degradation. These results indicated existence of the great variations in the degradability of BPs in aerobic and anaerobic waste landfills, and suggest that suitable technologies for managing the waste landfill must be combined with utilization of BPs in order to enhance the reduction of waste volume in landfill sites.

摘要

在分别进行厌氧和需氧操作的垃圾填埋场模型反应器中,研究了四种商用生物可降解塑料(BP),即聚羟基丁酸酯和羟基戊酸酯(PHBV)塑料、聚己内酯塑料(PCL)、淀粉与聚乙烯醇共混物(SPVA)塑料以及醋酸纤维素(CA)塑料的降解性能。向垃圾填埋场反应器强制曝气以提供需氧条件,可能会刺激聚合物降解微生物。然而,BP在需氧条件下的个体降解行为却完全不同。PCL是一种化学合成的BP,在两种条件下均出现薄膜破裂,这可能有助于减少垃圾体积,无论需氧还是厌氧条件。在需氧条件下观察到PHBV塑料有有效降解,而在厌氧条件下观察到降解不足。但曝气对加速SPVA塑料和CA塑料的体积减少作用不大。可以说,SPVA塑料中的聚乙烯醇以及CA塑料中高度取代的CA等塑料难降解部分阻碍了BP的降解。这些结果表明,BP在需氧和厌氧垃圾填埋场中的降解性能存在很大差异,并表明必须将合适的垃圾填埋管理技术与BP的利用相结合,以提高垃圾填埋场的垃圾体积减少量。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验