Mercier-Bonin M, Ouazzani K, Schmitz P, Lorthois S
Laboratoire de Biotechnologie et Bioprocédés, UMR CNRS 5504 UMR INRA 792, INSA, 135, avenue de Rangueil, 31077 Toulouse Cedex 4, France.
J Colloid Interface Sci. 2004 Mar 15;271(2):342-50. doi: 10.1016/j.jcis.2003.11.045.
The attachment of microorganisms to a surface is a critical first step of biofilm fouling in membrane processes. The shear-induced detachment of baker's yeast in adhesive contact with a plane glass surface was thus experimentally studied, using a specially designed shear stress flow chamber. The yeast was marketed either as rod-shaped pellets (type I yeast) or as spherical pellets (type II yeast). A complete series of experiments for measuring the shear stress necessary to detach a given proportion of individual yeast cells of type I or II was performed under different environmental conditions (ionic strength, contact time). In parallel, the surface physicochemical properties of the cells (surface charge, hydrophobicity, and electron donor and electron acceptor components) were determined. For the first type of yeast cells, which were rather hydrophilic, adhesion to the glass plate was weak. This was due to both electrostatic effects and hydrophilic repulsion. Furthermore, adhesion was not sensitive to any variation of the ionic strength. For yeast of the second type, adhesion was drastically increased. This could be explained by their physicochemical surface properties and especially their hydrophobic and electron acceptor components, which caused strong attractive van der Waals and Lewis acid-base interactions, counterbalancing the electrostatic repulsion. For increasing ionic strengths, adhesion was greater, due to lower electrostatic repulsion. The results were quantified through the definition of a critical wall shear stress ( tau w 50% ) required to detach 50% of the yeast cells initially deposited on the glass surface. The influence of the contact time was also evaluated and it was shown that, whatever the type of yeast, macromolecules such as proteins were released into the extracellular medium due to cell lysis and could contribute to the formation of a conditioning film. As a result, the cells were more strongly stuck to the glass plate.
微生物附着于表面是膜过程中生物膜污染的关键第一步。因此,使用专门设计的剪切应力流动腔,对与平板玻璃表面处于粘附接触状态的面包酵母的剪切诱导脱离进行了实验研究。酵母以棒状颗粒(I型酵母)或球形颗粒(II型酵母)的形式销售。在不同环境条件(离子强度、接触时间)下,进行了一系列完整的实验,以测量使给定比例的I型或II型单个酵母细胞脱离所需的剪切应力。同时,测定了细胞的表面物理化学性质(表面电荷、疏水性以及电子供体和受体成分)。对于第一种较为亲水的酵母细胞,其对玻璃板的粘附较弱。这是静电作用和亲水排斥共同作用的结果。此外,粘附对离子强度的任何变化都不敏感。对于第二种酵母,粘附力大幅增加。这可以用其物理化学表面性质来解释,特别是其疏水和电子受体成分,它们会引起强烈的范德华引力和路易斯酸碱相互作用,抵消静电排斥。随着离子强度增加,由于静电排斥降低,粘附力更大。通过定义使最初沉积在玻璃表面的50%酵母细胞脱离所需的临界壁面剪切应力(τw 50%)对结果进行了量化。还评估了接触时间的影响,结果表明,无论酵母类型如何,由于细胞裂解,蛋白质等大分子会释放到细胞外介质中,并可能有助于形成调节膜。结果,细胞与玻璃板的粘附更强。