Cohen Ariel, Spira Micha E, Yitshaik Shlomo, Borghs Gustaaf, Shwartzglass Ofer, Shappir Joseph
Faculty of Science, School of Applied Science, The Hebrew University of Jerusalem, Givat Ram Campus, Jerusalem, Israel.
Biosens Bioelectron. 2004 Jul 15;19(12):1703-9. doi: 10.1016/j.bios.2004.01.021.
We report the realization of electrical coupling between neurons and depletion type floating gate (FG) p-channel MOS transistors. The devices were realized in a shortened 0.5 microm CMOS technology. Increased boron implant dose was used to form the depletion type devices. Post-CMOS processing steps were added to expose the devices sensing area. The neurons are coupled to the polycrystalline silicon (PS) FG through 420A thermal oxide in an area which is located over the thick field oxide away from the transistor. The combination of coupling area pad having a diameter of 10 or 15 microm and sensing transistor with W/L of 50/0.5 microm results in capacitive coupling ratio of the neuron signal of about 0.5 together with relatively large transistor transconductance. The combination of the FG structure with a depletion type device, leads to the following advantages. (a) No need for dc bias between the solution in which the neurons are cultured and the transistor with expected consequences to the neuron as well as the silicon die durability. (b) The sensing area of the neuron activity is separated from the active area of the transistor. Thus, it is possible to design the sensing area and the channel area separately. (c) The channel area, which is the most sensitive part of the transistor, can be insulated and shielded from the ionic solution in which the neurons are cultured. (d) There is an option to add a switching transistor to the FG and use the FG also for the neuron stimulation.
我们报告了神经元与耗尽型浮栅(FG)p沟道MOS晶体管之间电耦合的实现情况。这些器件是采用缩短的0.5微米CMOS技术实现的。使用增加的硼注入剂量来形成耗尽型器件。添加了CMOS后处理步骤以暴露器件的传感区域。神经元通过420A热氧化物在远离晶体管的厚场氧化层上方的区域与多晶硅(PS)FG耦合。直径为10或15微米的耦合区域焊盘与宽长比为50/0.5微米的传感晶体管相结合,导致神经元信号的电容耦合率约为0.5,同时晶体管跨导相对较大。FG结构与耗尽型器件的结合带来了以下优点。(a)在培养神经元的溶液与晶体管之间无需直流偏置,这对神经元以及硅芯片的耐久性都有预期的效果。(b)神经元活动的传感区域与晶体管的有源区域分开。因此,可以分别设计传感区域和沟道区域。(c)沟道区域是晶体管最敏感的部分,可以与培养神经元的离子溶液绝缘并屏蔽。(d)可以选择在FG上添加一个开关晶体管,并将FG也用于神经元刺激。