Starsky Andrew J, Sangani Samir G, McGuire John R, Logan Brent, Schmit Brian D
Department of Biomedical Engineering, Marquette University, Milwaukee, WI 53201-1881, USA.
Arch Phys Med Rehabil. 2005 Aug;86(8):1648-54. doi: 10.1016/j.apmr.2005.03.015.
To determine the minimum number of measurements required to obtain a reliable estimate of upper-extremity spasticity using biomechanic assessment across multiple testing trials and dates.
Single-center, longitudinal study with repeated measurements of spastic upper-extremity torque measures taken 1 week apart.
A hospital-based laboratory with an isokinetic testing system.
Sixteen subjects more than 6 months poststroke with upper-extremity spasticity.
Elbow flexor hypertonia was assessed with a custom-made manipulandum attached to a 6-axis load cell and a Biodex System 3 isokinetic testing machine. Movements into extension were imposed at 4 speeds: 6 degrees /s, 30 degrees /s, 60 degrees /s, and 90 degrees /s.
The resistive torque and electromyographic response to these imposed movements were measured. The torque response at the slowest speed (6 degrees /s) was attributed solely to the passive elements of the elbow and was subtracted from the torque response at the higher speeds (30 degrees /s, 60 degrees /s, 90 degrees /s), leaving only reflex torque. The reflex torques at 30 degrees /s, 60 degrees /s, and 90 degrees /s were used for further analysis. Peak torque, peak joint stiffness, and onset angle of reflex torque responses were found; repeatability and daily variability of these measures were statistically examined. The variabilities due to the subject, test day, and trial number were computed. The overall reliability of each parameter at the 3 higher test speeds using different testing schemes was also calculated.
Ninety percent reliability in the measurement of all parameters was obtained after at least 2 days of testing during which 3 tests a day were performed. The variability in between-subjects measurements was at least 4 times greater than the intertrial variability when testing at the highest speeds; daily variability that was up to 50% of the intersubject variability was also observed. The biomechanic measures correlated well with the Ashworth Scale (Spearman rho=.84, P<.005), a clinical measure of hypertonia.
We recommend at least 2 test dates to account for the daily variability in the spastic reflex response and to ensure reliable spasticity measurements.
通过在多个测试试验和不同日期进行生物力学评估,确定获得可靠的上肢痉挛估计值所需的最少测量次数。
单中心纵向研究,对痉挛性上肢扭矩测量值进行重复测量,测量间隔为1周。
一家配备等速测试系统的医院实验室。
16名中风后6个月以上且存在上肢痉挛的受试者。
使用连接到六轴测力传感器的定制操作器和Biodex System 3等速测试机评估肘屈肌张力亢进。以4种速度进行伸展运动:6度/秒、30度/秒、60度/秒和90度/秒。
测量对这些强制运动的阻力扭矩和肌电图反应。最慢速度(6度/秒)下的扭矩反应仅归因于肘部的被动元件,并从较高速度(30度/秒、60度/秒、90度/秒)下的扭矩反应中减去,仅留下反射扭矩。使用30度/秒、60度/秒和90度/秒下的反射扭矩进行进一步分析。找到峰值扭矩、峰值关节刚度和反射扭矩反应的起始角度;对这些测量值的重复性和每日变异性进行统计学检验。计算受试者、测试日期和试验次数引起的变异性。还计算了使用不同测试方案时在3种较高测试速度下每个参数的总体可靠性。
在至少2天的测试中,每天进行3次测试后,所有参数测量的可靠性达到90%。在最高速度测试时,受试者间测量的变异性至少比试验间变异性大4倍;还观察到每日变异性高达受试者间变异性的50%。生物力学测量值与Ashworth量表(Spearman等级相关系数=0.84,P<0.005)相关性良好,Ashworth量表是一种肌张力亢进的临床测量方法。
我们建议至少进行2个测试日期,以考虑痉挛反射反应的每日变异性,并确保可靠的痉挛测量。