Berkenpas E, Millard P, Pereira da Cunha M
Department of Electrical and Computer Engineering, University of Maine, Orono, ME, USA.
Biosens Bioelectron. 2006 Jun 15;21(12):2255-62. doi: 10.1016/j.bios.2005.11.005. Epub 2005 Dec 13.
The toxigenic Escherichia coli O157:H7 bacterium has been connected with hemorrhagic colitis and hemolytic uremic syndrome, which may be characterized by diarrhea, kidney failure and death. On average, O157:H7 causes 73,000 illnesses, 2100 hospitalizations and 60 deaths annually in the United States alone. There is the need for sensors capable of rapidly detecting dangerous microbes in food and water supplies to limit the exposure of human and animal populations. Previous work by the authors used shear horizontal surface acoustic wave (SH SAW) devices fabricated on langasite (LGS) Euler angles (0 degrees, 22 degrees, 90 degrees) to successfully detect macromolecular protein assemblies. The devices also demonstrated favorable temperature stability, biocompatibility and low attenuation in liquid environments, suggesting their applicability to bacterial detection. In this paper, a biosensor test setup utilizing a small volume fluid injection system, stable temperature control and high frequency phase measurement was applied to validate LGS SH SAW biosensors for bacterial detection. The LGS SH SAW delay lines were fabricated and derivatized with a rabbit polyclonal IgG antibody, which selectively binds to E. coli O157:H7, in this case a non-toxigenic test strain. To quantify the effect of non-specific binding (negative control), an antibody directed against the trinitrophenyl hapten (TNP) was used as a binding layer. Test E. coli bacteria were cultured, fixed with formaldehyde, stained with cell-permeant nucleic acid stain, suspended in phosphate buffered saline and applied to the antibody-coated sensing surfaces. The biosensor transmission coefficient phase was monitored using a network analyzer. Phase responses of about 14 degrees were measured for the E. coli detection, as compared to 2 degrees due to non-specific anti-TNP binding. A 30:1 preference for E. coli binding to the anti-O157:H7 layer when compared to the anti-TNP layer was observed with fluorescence microscopy, thus confirming the selectivity of the antibody surface to E. coli.
产毒大肠杆菌O157:H7与出血性结肠炎和溶血尿毒综合征有关,其特征可能为腹泻、肾衰竭和死亡。仅在美国,O157:H7平均每年就导致73000例疾病、2100例住院治疗和60例死亡。需要能够快速检测食品和水源中危险微生物的传感器,以限制人类和动物群体的接触。作者之前的工作使用在硅酸镧(LGS)欧拉角(0度、22度、90度)上制造的水平剪切表面声波(SH SAW)器件成功检测了大分子蛋白质组装体。这些器件还表现出良好的温度稳定性、生物相容性以及在液体环境中的低衰减,表明它们适用于细菌检测。在本文中,采用了一种利用小体积流体注射系统、稳定温度控制和高频相位测量的生物传感器测试装置,以验证LGS SH SAW生物传感器用于细菌检测的能力。制造了LGS SH SAW延迟线并用兔多克隆IgG抗体进行衍生化,该抗体选择性结合大肠杆菌O157:H7,在这种情况下是一种非产毒测试菌株。为了量化非特异性结合(阴性对照)的影响,使用针对三硝基苯基半抗原(TNP)的抗体作为结合层。将测试的大肠杆菌进行培养,用甲醛固定,用细胞渗透性核酸染料染色,悬浮在磷酸盐缓冲盐水中,并应用于抗体包被的传感表面。使用网络分析仪监测生物传感器的传输系数相位。检测大肠杆菌时测量到的相位响应约为14度,相比之下,非特异性抗TNP结合导致的相位响应为2度。通过荧光显微镜观察到,与抗TNP层相比,大肠杆菌与抗O157:H7层结合的偏好性为30:1,从而证实了抗体表面对大肠杆菌的选择性。