Mahnken Andreas H, Mühlenbruch Georg, Koos Ralf, Stanzel Sven, Busch Petra Simone, Niethammer Mathias, Günther Rolf W, Wildberger Joachim E
Department of Diagnostic Radiology, University Hospital, RWTH Aachen University, Pauwelsstrasse 30, 52074, Aachen, Germany.
Eur Radiol. 2006 Jul;16(7):1416-23. doi: 10.1007/s00330-006-0226-1. Epub 2006 Apr 11.
We compared semiautomatic contour detection and manual contour tracing in cardiac multidetector row computed tomography (MDCT) with magnetic resonance imaging (MRI) for calculation of left-ventricular (LV) volumes. The study included 30 patients who underwent contrast-enhanced cardiac MDCT and cardiac cine-MRI. Were calculated 8 mm short-axis slices from MDCT data using three-dimensional multiphase image reconstruction. LV volumes including peak ejection rate and peak filling rate were calculated from manually and semiautomatically determined contours. Results were compared to those from cine-MRI with manually drawn contours as the standard of reference. We found good agreement for the LV volumes, with an ejection fraction of 47.1+/-9.4% for manually drawn contours, 47.9+/-9.9% for semiautomatically detected contours on MDCT, and 48.0+/-10.2% for MRI. Except for peak-filling rate analysis of variance revealed no difference between any of these techniques. Bland-Altman plots and Lin's concordance correlation coefficient showed best agreement between MRI and manual contour tracing in MDCT. Calculation of LV volumes using either semiautomatic or manual contour tracing in cardiac MDCT is therefore feasible when compared to MRI. Automated contour detection needs to be improved to equal manual contour tracing.
我们比较了心脏多排螺旋计算机断层扫描(MDCT)中的半自动轮廓检测和手动轮廓追踪与磁共振成像(MRI)在计算左心室(LV)容积方面的差异。该研究纳入了30例接受对比增强心脏MDCT和心脏电影MRI检查的患者。使用三维多期图像重建从MDCT数据中计算出8毫米短轴切片。根据手动和半自动确定的轮廓计算LV容积,包括峰值射血率和峰值充盈率。将结果与以手动绘制轮廓作为参考标准的电影MRI结果进行比较。我们发现LV容积的一致性良好,手动绘制轮廓的射血分数为47.1±9.4%,MDCT上半自动检测轮廓的射血分数为47.9±9.9%,MRI的射血分数为48.0±10.2%。除峰值充盈率外,方差分析显示这些技术之间没有差异。Bland-Altman图和Lin一致性相关系数显示MRI与MDCT中的手动轮廓追踪之间的一致性最佳。因此,与MRI相比,在心脏MDCT中使用半自动或手动轮廓追踪计算LV容积是可行的。自动轮廓检测需要改进以达到与手动轮廓追踪相同的效果。