Khorasani M T, Moemenbellah S, Mirzadeh H, Sadatnia B
Biomaterial Department of Iran Polymer and Petrochemical Institute, P.O. Box 14965/115, Tehran, Iran.
Colloids Surf B Biointerfaces. 2006 Aug 15;51(2):112-9. doi: 10.1016/j.colsurfb.2006.06.002. Epub 2006 Jun 12.
Wettability and zeta potential studies were performed to characterize the hydrophobicity and surface charge of virgin and oxygen plasma irradiated silicone rubbers and polyurethane (polyether and polyesther) samples and evaluate the effect of hydrophobicity and surface charge on fibroblast cells attachment and growth. The surface properties of polyurethanes and silicones and plasma irradiated surfaces were compared by water drop contact angle and zeta potential measurement. Using SEM photomicrographs to study the morphology of virgin and plasma irradiated samples surfaces and light microscopy for study the behavior of cell attachment on these surfaces. Water drop contact angle measurements show that in despite of the silicones, the polyurethanes become more hydrophobic and have stable surface than silicones. Results show that wettability of plasma treated silicones increase and after 48 h recovery take place. Zeta potential measurements noticed that plasma treated polyetherurethane surface is more negatively charge, and consequently attachment of the L929 fibroblast cells decreased whereas on silicones surfaces, negatively charge surfaces show increase cells attachment.
进行润湿性和zeta电位研究,以表征未处理的以及经氧等离子体辐照的硅橡胶和聚氨酯(聚醚和聚酯)样品的疏水性和表面电荷,并评估疏水性和表面电荷对成纤维细胞附着和生长的影响。通过水滴接触角和zeta电位测量比较了聚氨酯、硅酮以及等离子体辐照表面的表面性质。使用扫描电子显微镜照片研究未处理的和经等离子体辐照的样品表面的形态,并用光学显微镜研究细胞在这些表面上的附着行为。水滴接触角测量表明,与硅酮不同,聚氨酯变得更疏水,并且比硅酮具有更稳定的表面。结果表明,经等离子体处理的硅酮的润湿性增加,并且在48小时恢复后发生变化。zeta电位测量发现,经等离子体处理的聚醚聚氨酯表面带更多负电荷,因此L929成纤维细胞的附着减少,而在硅酮表面,带负电荷的表面显示细胞附着增加。