Effect of hinge gap width on the microflow structures in 27-mm bileaflet mechanical heart valves.

BACKGROUND AND AIM OF THE STUDY

Most bileaflet mechanical heart valves (BMHVs) incorporate some retrograde flow through their hinge mechanism to prevent flow stasis and inhibit microthrombus formation. This reverse flow is characterized by high velocities and shear stresses, thereby promoting platelet activation and hemolysis inside the hinge region. In the present study, the thromboembolic potential of three 27-mm BMHVs with varying hinge gap widths was assessed via in-vitro characterization of the hinge microflow structures.

METHODS

Three 27-mm BMHV prototypes with different hinge gap widths (50, 100, and 200 microm) were provided by St. Jude Medical Inc. The valves were mounted in the mitral position of a left heart flow simulator, and two-dimensional laser Doppler velocimetry was used to measure the hinge velocity fields.

RESULTS

All three valve prototypes revealed Reynolds shear stress (RSS) levels above 2000 dynes/cm2, which exceeded the threshold for platelet activation and hemolysis. The hinge flow fields were characterized by leakage jets during systole, and a strong vortical flow during diastole. The leakage jet size and corresponding RSS levels were found to increase with the hinge gap width. All three gap widths had RSS >4000 dynes/cm2 (range: 5640 to 13,315 dynes/cm2). The hinge with the smallest gap width registered the highest jet velocity magnitude (2.08 m/s) during systole.

CONCLUSION

The study results showed that the hinge gap width influences washout and RSS levels inside the hinge recess. The 100-microm hinge gap width provided optimum fluid dynamic performance. In contrast, the two valves with large and small hinge gap widths may have higher thromboembolic potential.