Suppr超能文献

利用高速光学相干断层扫描技术对黄斑裂孔进行三维成像

Three-dimensional imaging of macular holes with high-speed optical coherence tomography.

作者信息

Hangai Masanori, Ojima Yumiko, Gotoh Norimoto, Inoue Ryo, Yasuno Yoshiaki, Makita Shuichi, Yamanari Masahiro, Yatagai Toyohiko, Kita Mihori, Yoshimura Nagahisa

机构信息

Department of Ophthalmology and Visual Science, Kyoto University Graduate School of Medicine, Kyoto, Japan.

出版信息

Ophthalmology. 2007 Apr;114(4):763-73. doi: 10.1016/j.ophtha.2006.07.055. Epub 2006 Dec 20.

Abstract

OBJECTIVE

To demonstrate the advantages of 3-dimensional imaging of macular hole pathology using new-generation high-speed optical coherence tomography (OCT).

DESIGN

Prospective observational case series.

PARTICIPANTS

Twenty-one eyes from 20 consecutive patients diagnosed with a macular hole.

METHODS

A prototype high-speed OCT system was built based on a Fourier-domain OCT (FD OCT) technology for patient examination. The system has achieved sensitivity of approximately 98 decibels, axial resolution of approximately 4.3 mum in tissue, and an acquisition rate of approximately 18,700 axial scans per second. Three-dimensional imaging of macular hole pathology was performed based on a raster scan protocol consisting of 256x256 axial scans. All patients were imaged with 3-dimensional OCT, Stratus OCT, and OCT Ophthalmoscope C7.

MAIN OUTCOME MEASURES

Images of macular hole pathologies obtained by 3-dimensional OCT and standard OCT instruments.

RESULTS

The 3-dimensional OCT imaging successfully generated realistic 3-dimensional images of the vitreofoveal interface and intraretinal microstructures associated with a macular hole. The 3-dimensional overview of the vitreofoveal interface was helpful in gaining an immediate understanding of the dynamic interactions of the vitreous and fovea. Observations of consecutive en face images in combination with conventional longitudinal images and of cross-sectional images in combination with sectioned volume images enabled identification of intraretinal microstructures and their 3-dimensional extension associated with a macular hole, such as subfoveal structural changes after vitreous traction, connection of the flap to intraretinal structures, the external limiting membrane (ELM) and its disruption, and elevated photoreceptor inner and outer segments delineated by the ELM. The appearance of inner-wall images of a macular hole produced by photoreceptor inner and outer segment backreflection varied throughout macular hole stages.

CONCLUSIONS

Three-dimensional imaging of macular holes with high-speed OCT based on FD OCT technology offers 3-dimensional overviews that facilitate understanding of the abnormalities in the vitreofoveal interface. It also provides consecutive orthogonal images that allow much more precise and minute observation of 3-dimensionally extending intraretinal structural changes associated with a macular hole than conventional OCT imaging, especially in the photoreceptor inner and outer segments.

摘要

目的

利用新一代高速光学相干断层扫描(OCT)展示黄斑裂孔病变的三维成像优势。

设计

前瞻性观察病例系列。

参与者

20例连续诊断为黄斑裂孔患者的21只眼。

方法

基于傅里叶域OCT(FD OCT)技术构建了一台用于患者检查的高速OCT系统原型。该系统的灵敏度约为98分贝,组织中的轴向分辨率约为4.3微米,采集速率约为每秒18,700次轴向扫描。基于由256×256轴向扫描组成的光栅扫描协议对黄斑裂孔病变进行三维成像。所有患者均接受三维OCT、Stratus OCT和OCT眼科镜C7成像。

主要观察指标

通过三维OCT和标准OCT仪器获得的黄斑裂孔病变图像。

结果

三维OCT成像成功生成了与黄斑裂孔相关的玻璃体黄斑界面和视网膜内微结构的逼真三维图像。玻璃体黄斑界面的三维全貌有助于立即了解玻璃体与黄斑的动态相互作用。结合传统纵向图像观察连续的正面图像以及结合切片容积图像观察横截面图像,能够识别与黄斑裂孔相关的视网膜内微结构及其三维延伸,例如玻璃体牵拉后黄斑下的结构变化、瓣与视网膜内结构的连接、外界膜(ELM)及其破坏,以及由ELM勾勒出的升高的光感受器内节和外节。由光感受器内节和外节背向反射产生的黄斑裂孔内壁图像在黄斑裂孔各阶段的表现各不相同。

结论

基于FD OCT技术的高速OCT对黄斑裂孔进行三维成像可提供三维全貌,有助于理解玻璃体黄斑界面的异常情况。它还提供连续的正交图像,与传统OCT成像相比,能够更精确、更细致地观察与黄斑裂孔相关的三维延伸的视网膜内结构变化,尤其是在光感受器内节和外节方面。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验