Yamada Tomohiko, Scheiman Mitchell, Mitchell G Lynn
Pennsylvania College of Optometry, Pediatric/Binocular Vision Services, Philadelphia, Pennsylvania 19141, USA.
Optometry. 2008 Mar;79(3):138-42. doi: 10.1016/j.optm.2007.05.013.
Measurement of stereopsis is important in assessing a patient's binocular status. Several measurement methods are available, most commonly using polarized targets. Recently, less expensive red/green targets have become available. In this study, we compare polarized versus red/green methods, using random dot and contour targets.
Sixty children with no strabismus, amblyopia, or high refractive error and normal ocular health were recruited. Stereopsis measurements were taken using the red/green and polarized versions of the Random Dot Letter "E"/RDE Test, Random Dot Butterfly/Stereo Butterfly Test, Stereo Circles/Wirt Circles, Stereo Numbers, and Stereo Animals tests. Observed agreement was used to assess agreement between results. Wilcoxon signed-rank tests were used to compare an individual's response with both targets.
There was greater than 95% agreement using any of the Random Dot-based tests and the Stereo Animals tests. However, agreement was less than 60% with the Stereo Numbers test and less than 35% with the Stereo Circles/Wirt Circles test.
The red/green versions of the Random Dot-based tests and the Stereo Animals test appear to be a cost-effective alternative to their polarized equivalents. Our data, however, show that the red/green versions tend to underestimate the level of stereopsis when using the Stereo Numbers and Stereo Circles/Wirt Circles tests compared to their polarized equivalents.
立体视的测量对于评估患者的双眼状态很重要。有多种测量方法可供使用,最常用的是使用偏振目标。最近,出现了价格较低的红/绿目标。在本研究中,我们使用随机点和轮廓目标比较偏振法与红/绿法。
招募了60名无斜视、弱视或高度屈光不正且眼部健康正常的儿童。使用随机点字母“E”/RDE测试、随机点蝴蝶/立体蝴蝶测试、立体圆圈/维尔特圆圈、立体数字和立体动物测试的红/绿版本和偏振版本进行立体视测量。观察一致性用于评估结果之间的一致性。威尔科克森符号秩检验用于比较个体对两种目标的反应。
使用任何基于随机点的测试和立体动物测试,一致性均超过95%。然而,立体数字测试的一致性低于60%,立体圆圈/维尔特圆圈测试的一致性低于35%。
基于随机点的测试和立体动物测试的红/绿版本似乎是其偏振等效测试的一种经济有效的替代方法。然而,我们的数据表明,与偏振等效测试相比,在使用立体数字和立体圆圈/维尔特圆圈测试时,红/绿版本往往会低估立体视水平。