Liu X Sherry, Huang Angela H, Zhang X Henry, Sajda Paul, Ji Baohua, Guo X Edward
Bone Bioengineering Laboratory, Department of Biomedical Engineering, Columbia University, 351 Engineering Terrace, Mail Code 8904, 1210 Amsterdam Avenue, New York, New York 10027, USA.
Laboratory for Intelligent Imaging and Neural Computing, Department of Biomedical Engineering, Columbia University, New York, New York, USA.
Bone. 2008 Aug;43(2):292-301. doi: 10.1016/j.bone.2008.04.008. Epub 2008 Apr 29.
A three dimensional (3D) computational simulation of dynamic process of trabecular bone remodeling was developed with all the parameters derived from physiological and clinical data. Contributions of the microstructural bone formation deficits: trabecular plate perforations, trabecular rod breakages, and isolated bone fragments, to the rapid bone loss and disruption of trabecular microarchitecture during menopause were studied. Eighteen human trabecular bone samples from femoral neck (FN) and spine were scanned using a micro computed tomography (microCT) system. Bone resorption and formation were simulated as a computational cycle corresponding to 40-day resorption/160-day formation. Resorption cavities were randomly created over the bone surface according to the activation frequency, which was strictly based on clinical data. Every resorption cavity was refilled during formation unless it caused trabecular plate perforation, trabecular rod breakage or isolated fragments. A 20-year-period starting 5 years before and ending 15 years after menopause was simulated for each specimen. Elastic moduli, standard and individual trabeculae segmentation (ITS)-based morphological parameters were evaluated for each simulated 3D image. For both spine and FN groups, the time courses of predicted bone loss pattern by microstructural bone formation deficits were fairly consistent with the clinical measurements. The percentage of bone loss due to trabecular plate perforation, trabecular rod breakage, and isolated bone fragments were 73.2%, 18.9% and 7.9% at the simulated 15 years after menopause. The ITS-based plate fraction (pBV/BV), mean plate surface area (pTb.S), plate number density (pTb.N), and mean rod thickness (rTb.Th) decreased while rod fraction (rBV/BV) and rod number density (rTb.N) increased after the simulated menopause. The dynamic bone remodeling simulation based on microstructural bone formation deficits predicted the time course of menopausal bone loss pattern of spine and FN. Microstructural plate perforation could be the primary cause of menopausal trabecular bone loss. The combined effect of trabeculae perforation, breakage, and isolated fragments resulted in fewer and smaller trabecular plates and more but thinner trabecular rods.
利用从生理和临床数据得出的所有参数,建立了小梁骨重塑动态过程的三维(3D)计算模拟。研究了微观结构骨形成缺陷(小梁板穿孔、小梁杆断裂和孤立骨碎片)对绝经期间快速骨质流失和小梁微结构破坏的影响。使用微型计算机断层扫描(microCT)系统扫描了来自股骨颈(FN)和脊柱的18个人类小梁骨样本。将骨吸收和形成模拟为一个对应于40天吸收/160天形成的计算周期。根据严格基于临床数据的激活频率,在骨表面随机创建吸收腔。每个吸收腔在形成过程中都会重新填充,除非它导致小梁板穿孔、小梁杆断裂或孤立碎片。对每个标本模拟了从绝经前5年开始到绝经后15年结束的20年时间段。对每个模拟的3D图像评估弹性模量、基于标准和个体小梁分割(ITS)的形态学参数。对于脊柱和FN组,由微观结构骨形成缺陷预测的骨质流失模式的时间进程与临床测量结果相当一致。在模拟绝经后15年时,由于小梁板穿孔、小梁杆断裂和孤立骨碎片导致的骨质流失百分比分别为73.2%、18.9%和7.9%。模拟绝经后,基于ITS的板分数(pBV/BV)、平均板表面积(pTb.S)、板数密度(pTb.N)和平均杆厚度(rTb.Th)降低,而杆分数(rBV/BV)和杆数密度(rTb.N)增加。基于微观结构骨形成缺陷的动态骨重塑模拟预测了脊柱和FN绝经后骨质流失模式的时间进程。微观结构板穿孔可能是绝经后小梁骨丢失的主要原因。小梁穿孔、断裂和孤立碎片的综合作用导致小梁板数量减少且尺寸变小,小梁杆数量增多但变细。