Ahn Jin-Soo, Lee Yong-Keun
Department of Dental Biomaterials Science, School of Dentistry, Seoul National University, Seoul, Korea.
J Prosthet Dent. 2008 Jul;100(1):18-28. doi: 10.1016/S0022-3913(08)60129-8.
Shade tabs in a shade guide are matched to teeth in the order of value, hue, and chroma; therefore, information on the distribution of shade tabs is essential for clinical application of a shade guide. However, there is limited information on the color distribution as sorted by these 3 parameters of a recently introduced shade guide.
The purposes of this study were to determine the color distributions of tabs from a shade guide in the value (CIE L*), chroma (C*(ab)), and hue scale, and to determine the distribution of step intervals between adjacent tabs by value and chroma.
The color of shade tabs (n=29) from a shade guide (Vitapan 3D-Master) was measured to determine the distribution of shade tabs by the value, chroma, hue angle, and CIE a* and b* values. The distribution of the ratios of the value and the chroma of each tab, when compared with the lowest value tab or the lowest chroma tab, was also determined. The data for each color parameter were analyzed by a 3-way ANOVA with the factors of value, chroma, and hue designations of the tabs (alpha=.05).
The value, chroma, hue angle, and CIE a* and b* values were influenced by the value, chroma, and hue designations of shade tabs (P<.001). The distributions of the chroma of the tabs within the same value group were relatively ordered, but the values of different value groups overlapped in several instances. Distributions for the CIE a* and b* values reflected the chroma designations in each value group. In the same value group, L, M, and R hue designations corresponded with the manufacturer's stated hue, such as a yellow hue for the L designation and a red hue for the R designation. The distance in the value and chroma scales between adjacent tabs was not uniform.
The color distribution of the Vitapan 3D-Master shade guide was more ordered than previously reported color distributions of other, traditional shade guides. However, the interval in the color parameters between adjacent tabs was not uniform; therefore, shade tabs spaced equally, according to the color parameters, should be studied based on the observer's response data.
比色板中的比色片按照明度、色相和彩度的顺序与牙齿进行匹配;因此,比色片的分布信息对于比色板的临床应用至关重要。然而,关于最近推出的比色板按照这三个参数分类的颜色分布信息有限。
本研究的目的是确定比色板中比色片在明度(CIE L*)、彩度(C*(ab))和色相尺度上的颜色分布,并确定相邻比色片之间按明度和彩度划分的步长间隔分布。
测量比色板(维他灵3D-Master)中比色片(n = 29)的颜色,以确定比色片在明度、彩度、色相角以及CIE a和b值方面的分布。还确定了每个比色片的明度与彩度比值与最低明度比色片或最低彩度比色片相比的分布情况。每个颜色参数的数据通过三因素方差分析进行分析,因素包括比色片的明度、彩度和色相分类(α = 0.05)。
明度、彩度、色相角以及CIE a和b值受比色片的明度、彩度和色相分类影响(P < 0.001)。同一明度组内比色片的彩度分布相对有序,但不同明度组的值在某些情况下会重叠。CIE a和b值的分布反映了每个明度组中的彩度分类。在同一明度组中,L、M和R色相分类与制造商规定的色相相对应,例如L分类为黄色相,R分类为红色相。相邻比色片在明度和彩度尺度上的距离并不均匀。
维他灵3D-Master比色板的颜色分布比之前报道的其他传统比色板的颜色分布更有序。然而,相邻比色片之间的颜色参数间隔并不均匀;因此,应根据观察者的反应数据研究按颜色参数等间距排列的比色片。