Wilkes R, Zhao Y, Kieswetter K, Haridas B
Kinetic Concepts, Inc., San Antonio, TX 78249, USA.
J Biomech Eng. 2009 Mar;131(3):031012. doi: 10.1115/1.2947358.
Vacuum-assisted closure (VAC) therapy, also referred to as vacuum-assisted closure negative pressure wound therapy (VAC NPWT), delivered to various dermal wounds is believed to influence the formation of granulation tissue via the mechanism of microdeformational signals. In recent years, numerous experimental investigations have been initiated to study the cause-effect relationships between the mechanical signals and the transduction pathways that result in improved granulation response. To accurately quantify the tissue microdeformations during therapy, a new three-dimensional finite element model has been developed and is described in this paper. This model is used to study the effect of dressing type and subatmospheric pressure level on the variations in the microdeformational strain fields in a model dermal wound bed. Three-dimensional geometric models representing typical control volumes of NPWT dressings were generated using micro-CT scanning of VAC GranuFoam, a reticulated open-cell polyurethane foam (ROCF), and a gauze dressing (constructed from USP Class VII gauze). Using a nonlinear hyperfoam constitutive model for the wound bed, simulated tissue microdeformations were generated using the foam and gauze dressing models at equivalent negative pressures. The model results showed that foam produces significantly greater strain than gauze in the tissue model at all pressures and in all metrics (p<0.0001 for all but epsilon(vol) at -50 mm Hg and -100 mm Hg where p<0.05). Specifically, it was demonstrated in this current work that the ROCF dressing produces higher levels of tissue microdeformation than gauze at all levels of subatmospheric pressure. This observation is consistent across all of the strain invariants assessed, i.e., epsilon(vol), epsilon(dist), the minimum and maximum principal strains, and the maximum shear strain. The distribution of the microdeformations and strain appears as a repeating mosaic beneath the foam dressing, whereas the gauze dressings appear to produce an irregular distribution of strains in the wound surface. Strain predictions from the developed computational model results agree well with those predicted from prior two-dimensional experimental and computational studies of foam-based NPWT (Saxena, V., et al., 2004, "Vacuum-assisted closure: Microdeformations of Wounds and Cell Proliferation," Plast. Reconstr. Surg., 114(5), pp. 1086-1096). In conjunction with experimental in vitro and in vivo studies, the developed model can now be extended into more detailed investigations into the mechanobiological underpinnings of VAC NPWT and can help to further develop and optimize this treatment modality for the treatment of challenging patient wounds.
负压封闭引流(VAC)疗法,也称为负压封闭引流负压伤口治疗(VAC NPWT),应用于各种皮肤伤口时,被认为是通过微变形信号机制影响肉芽组织的形成。近年来,已开展了大量实验研究,以探究机械信号与转导途径之间的因果关系,这些转导途径可导致更好的肉芽反应。为了准确量化治疗过程中的组织微变形,本文开发并描述了一种新的三维有限元模型。该模型用于研究敷料类型和负压水平对模型皮肤伤口床微变形应变场变化的影响。使用微计算机断层扫描(micro-CT)对VAC GranuFoam(一种网状开孔聚氨酯泡沫(ROCF))、纱布敷料(由美国药典VII类纱布制成)进行扫描,生成了代表NPWT敷料典型控制体积的三维几何模型。对伤口床使用非线性超泡沫本构模型,在等效负压下,使用泡沫和纱布敷料模型模拟组织微变形。模型结果表明,在所有压力和所有指标下,泡沫在组织模型中产生的应变均显著大于纱布(除-50 mmHg和-100 mmHg时的体积应变ε(vol),其p<0.05外,其他所有指标p<0.0001)。具体而言,当前研究表明,在所有负压水平下,ROCF敷料比纱布产生更高水平的组织微变形。在所有评估的应变不变量中,即体积应变ε(vol)、距离应变ε(dist)、最小和最大主应变以及最大剪应变,这一观察结果都是一致的。微变形和应变分布在泡沫敷料下方呈现出重复的镶嵌图案,而纱布敷料在伤口表面似乎产生不规则的应变分布。所开发的计算模型结果的应变预测与先前基于泡沫的NPWT的二维实验和计算研究(Saxena, V., 等人,2004年,“负压封闭引流:伤口的微变形与细胞增殖”,《整形与重建外科》,114(5),第1086 - 1096页)预测的结果吻合良好。结合体外和体内实验研究,所开发的模型现在可以扩展到对VAC NPWT的机械生物学基础进行更详细的研究,并有助于进一步开发和优化这种治疗方式,以治疗具有挑战性的患者伤口。