Determinants of friction in soft elastohydrodynamic lubrication.

Elastohydrodynamic lubrication (EHL) protects soft tissues from damage and wear in many biological systems (e.g. synovial joints, cornea of the eye, and pleural surfaces of the lung and chest wall). Among studies of lubrication of deformable solids, few have examined the effects of external loads, geometry, and material properties on EHL of soft tissues. To examine these effects, we studied the tribology of soft tissues in a two-dimensional finite element simulation of a thin layer of fluid separating a sliding rigid surface from a soft asperity or bump with an initial sinusoidal shape. We computed the frictional force, deformation of the solid, and change in fluid thickness as functions of independent variables: sliding velocity, normal load, material properties, and bump amplitude and length. Double-logarithmic regression was used to determine the exponents of the scaling relationships of friction coefficient and minimum fluid thickness to the independent variables. The analysis showed that frictional shear force is strongly dependent on velocity, viscosity, and load, moderately dependent on bump length and elasticity, and only weakly dependent on the bump amplitude. The minimum fluid thickness is strongly dependent on velocity and viscosity, and changes moderately with load, elasticity, amplitude, and length. The shape of the bump has little effect. The results confirm that the shear-induced deformation of an initially symmetrical shape, including generalizations to other symmetrical geometries such as quadratic or piecewise linear bumps, leads to load-supporting behavior.