Suppr超能文献

利用磁共振成像评估房水引流植入物的位置和功能。

Evaluation of the position and function of aqueous drainage implants with magnetic resonance imaging.

作者信息

Detorakis Efstathios T, Maris Thomas, Papadaki Efrosini, Tsilimbaris Miltiadis K, Karantanas Apostolos H, Pallikaris Ioannis G

机构信息

Department of Ophthalmology, University Hospital of Heraklion, Crete, Greece.

出版信息

J Glaucoma. 2009 Aug;18(6):453-9. doi: 10.1097/IJG.0b013e3181895e42.

Abstract

PURPOSE

To evaluate position and function of antiglaucomatous Ahmed and Molteno shunts using magnetic resonance imaging with head and surface coils.

METHODS

Eight patients (5 males) with shunt implants were included, 4 with Ahmed (FP-7) and 4 with Molteno (s1, single plated). All patients were operated at least 6 months before imaging. In 3 cases (2 with Molteno and 1 with Ahmed shunt), the intraocular pressure (IOP) was above 21 mm Hg, despite maximal medical treatment. The shunt endplate, tube and filtering blebs were identified in T1-weighted and T2-weighted images with both head and surface coils. Volumetric measurements of the orbits, eyeball, and filtering bleb and calculation of the endplate position along sagittal, transverse, and vertical axes were performed in T1-weighted and T2-weighted images using head coils.

RESULTS

The shunt endplate was identified in T1-weighted and T2-weighted images (head coils) as a low intensity (dark) circumlinear band at the superotemporal aspect of the eyeball, surrounded by a pocket of water density, corresponding to the filtering bleb. The anterior position of the endplate, and smaller volume of the orbital cavity (less available orbital space) were associated with higher IOP. Filtering bleb volume was inversely correlated with IOP. In the unsuccessful cases, filtering bleb was absent.

CONCLUSIONS

Magnetic resonance imaging provides insights into the mechanism of aqueous outflow and causes of failure of shunts. A lower orbital volume is associated with anterior position of the shunt endplate and poor shunt performance.

摘要

目的

使用头部线圈和表面线圈的磁共振成像来评估抗青光眼Ahmed和Molteno分流器的位置和功能。

方法

纳入8例植入分流器的患者(5例男性),4例使用Ahmed(FP - 7型),4例使用Molteno(s1型,单板)。所有患者在成像前至少已手术6个月。在3例患者中(2例使用Molteno分流器,1例使用Ahmed分流器),尽管进行了最大程度的药物治疗,但眼压(IOP)仍高于21 mmHg。在T1加权和T2加权图像中使用头部线圈和表面线圈识别分流器终板、导管和滤过泡。使用头部线圈在T1加权和T2加权图像中对眼眶、眼球和滤过泡进行体积测量,并计算终板沿矢状轴、横轴和垂直轴的位置。

结果

在T1加权和T2加权图像(头部线圈)中,分流器终板在眼球颞上方表现为低强度(暗)的环形带,周围是水样密度的腔隙,对应于滤过泡。终板的前部位置以及眼眶腔体积较小(眼眶可用空间较少)与较高的眼压相关。滤过泡体积与眼压呈负相关。在手术失败的病例中,未出现滤过泡。

结论

磁共振成像有助于深入了解房水流出机制和分流器失败的原因。眼眶体积较小与分流器终板的前部位置和分流器性能不佳有关。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验