Cell Architecture Laboratory, Center for Frontier Research, National Institute of Genetics, Yata 1111, Mishima, Shizuoka 411-8540, Japan.
Curr Biol. 2009 Sep 29;19(18):1549-54. doi: 10.1016/j.cub.2009.07.050. Epub 2009 Aug 13.
Cell size is one of the critical parameters controlling the size of intracellular structures. A well-known example is the constant nuclear-to-cytoplasmic ratio (N/C ratio) [1-5]. The length of the metaphase spindle is proportional to cell size, but it has an upper limit during early embryogenesis [6]. During anaphase, the mitotic spindle elongates and delivers the centrosomes and sister chromatids near the centers of the nascent daughter cells. Here, we quantified the relationship between spindle elongation and cell size in the early embryo of Caenorhabditis elegans and propose possible models for cell-size-dependent spindle elongation. Quantitative measurements revealed that the extent and speed of spindle elongation are correlated with cell size throughout early embryogenesis. RNAi knockdown of Galpha proteins and their regulators revealed that the spindles failed to fully elongate and that the speed of spindle elongation was almost constant regardless of cell size. Our results suggest that spindle elongation is controlled by two qualitatively distinct mechanisms, i.e., Galpha-dependent and -independent modes of elongation. Simulation analyses revealed that the constant-pulling model and the force-generator-limited model reproduced the dynamics of the Galpha-independent and Galpha-dependent mechanisms, respectively. These models also explain how the set length of spindles is achieved.
细胞大小是控制细胞内结构大小的关键参数之一。一个众所周知的例子是核质比(N/C 比)恒定[1-5]。有丝分裂纺锤体的长度与细胞大小成正比,但在早期胚胎发生过程中有一个上限[6]。在后期,有丝分裂纺锤体伸长,并将中心体和姐妹染色单体运送到新形成的子细胞的中心附近。在这里,我们定量研究了秀丽隐杆线虫早期胚胎中纺锤体伸长与细胞大小之间的关系,并提出了可能的细胞大小依赖性纺锤体伸长模型。定量测量结果表明,在整个早期胚胎发生过程中,纺锤体的伸长程度和速度与细胞大小相关。Galpha 蛋白及其调节剂的 RNAi 敲低表明,纺锤体未能完全伸长,并且无论细胞大小如何,纺锤体伸长的速度几乎保持不变。我们的结果表明,纺锤体伸长受两种不同性质的机制控制,即 Galpha 依赖性和非依赖性伸长模式。模拟分析表明,恒定拉力模型和力发生器限制模型分别再现了 Galpha 非依赖性和 Galpha 依赖性机制的动力学。这些模型还解释了如何实现纺锤体的设定长度。