Wang Shiren, Zhang Yue, Abidi Noureddine, Cabrales Luis
Department of Industrial Engineering, Fiber and Biopolymer Institute, Texas Tech University, Lubbock, TX 79409, USA.
Langmuir. 2009 Sep 15;25(18):11078-81. doi: 10.1021/la901402f.
Graphene sheets were produced through chemical exfoliation of natural graphite flake and hydrazine conversion. Subsequently, graphene sheets were assembled into a thin film, and microscale liquid droplets were placed onto the film surface for measurement of wettability and contact angle. It is found that a graphene oxide sheet is hydrophilic and a graphene sheet is hydrophobic. Isolated graphene layers seem more difficult to wet in comparison to graphite, and low adhesion work was found in the graphene-liquid interface. Approximation of solid-liquid interfacial energy with the equation of state theory was applied to determine the graphene surface energy. The results indicate that surface energy of graphene and graphene oxide is 46.7 and 62.1 mJ/m2, respectively, while natural graphite flake shows a surface free energy of 54.8 mJ/m2 at room temperature. These results will provide valuable guidance for the design and manufacturing of graphene-based biomaterials, medical instruments, structural composites, electronics, and renewable energy devices.
通过天然石墨薄片的化学剥离和肼转化制备了石墨烯片。随后,将石墨烯片组装成薄膜,并将微尺度液滴放置在薄膜表面以测量润湿性和接触角。发现氧化石墨烯片是亲水的,而石墨烯片是疏水的。与石墨相比,孤立的石墨烯层似乎更难被润湿,并且在石墨烯-液体界面中发现了低粘附功。应用状态方程理论近似固液界面能来确定石墨烯表面能。结果表明,石墨烯和氧化石墨烯的表面能分别为46.7和62.1 mJ/m²,而天然石墨薄片在室温下的表面自由能为54.8 mJ/m²。这些结果将为基于石墨烯的生物材料、医疗器械、结构复合材料、电子产品和可再生能源设备的设计和制造提供有价值的指导。