Micro and Nanosystems, Department of Mechanical and Process Engineering, ETH Zurich, Zurich, Switzerland.
Nanotechnology. 2009 Oct 28;20(43):434010. doi: 10.1088/0957-4484/20/43/434010. Epub 2009 Oct 2.
Single-walled carbon nanotube field-effect transistors (CNFETs) are promising functional structures in future micro- or nanoelectronic systems and sensor applications. Research on the fundamental device concepts includes the investigation of the conditions for stable long term CNFET operation. CNFET operation in ambient air leads to on-state current degradation and fluctuating signals due to the well-known sensitivity of the electronic properties of the CNT to many environmental condition changes. It is the goal of device and sensor research to understand various kinds of sensor-environment interactions and to overcome the environmental sensitivity. Here, we show that the encapsulation of CNFETs by a thermal atomic-layer-deposited (ALD) aluminium oxide (Al(2)O(3)) layer of approximately 100 nm leads to stable device operation for 260 days and reduces their sensitivity to the environment. The characteristics of CNFETs prior to and after Al(2)O(3) encapsulation are comparatively investigated. It is found that encapsulation improves the stability of the CNFET characteristics with respect to the gate threshold voltage, hysteresis width and the on-state current, while 1/f noise is lowered by up to a factor of 7. Finally, CNFETs embedded in a dielectric membrane are employed as pressure sensors to demonstrate sensor operation of CNFETs encapsulated by ALD as piezoresistive transducers.
单壁碳纳米管场效应晶体管 (CNFET) 是未来微纳电子系统和传感器应用中很有前途的功能结构。对基本器件概念的研究包括对稳定的 CNFET 长期运行条件的研究。由于 CNT 的电子特性对许多环境条件变化非常敏感,因此 CNFET 在环境空气中的运行会导致导通电流下降和信号波动。器件和传感器研究的目标是了解各种传感器-环境相互作用并克服环境敏感性。在这里,我们表明,通过约 100nm 的热原子层沉积 (ALD) 氧化铝 (Al(2)O(3)) 层对 CNFET 进行封装可实现 260 天的稳定器件运行,并降低其对环境的敏感性。比较研究了 CNFET 在封装前后的特性。结果发现,封装可以提高 CNFET 特性的稳定性,包括栅极阈值电压、迟滞宽度和导通电流,同时 1/f 噪声降低了高达 7 倍。最后,将嵌入介电膜中的 CNFET 用作压力传感器,以展示通过 ALD 封装的 CNFET 的传感器运行情况作为压阻式传感器。