Department of Obstetrics and Gynaecology, University of Hong Kong, Queen Mary Hospital, Hong Kong, SAR China.
Ultrasound Obstet Gynecol. 2010 Aug;36(2):210-7. doi: 10.1002/uog.7609.
To compare XI VOCAL (eXtended Imaging Virtual Organ Computer-aided AnaLysis) for three-dimensional (3D) ultrasound volumetry of the placenta and of phantom objects with a rotational method using VOCAL and with the multiplanar method.
We acquired 3D volume datasets from 32 fetuses at 11-14 weeks' gestation. Placental volume was calculated twice by each of two observers using XI VOCAL (with 5, 10, 15 and 20 slices), multiplanar (1-mm interval) and VOCAL (with 12 degrees, 18 degrees and 30 degrees rotation) methods. In addition, validity was assessed using the in-vitro setting with three phantom objects of known volume.
Both inter- and intraobserver reliabilities were very high for all three methods. There was no systematic bias between any two methods except between XI VOCAL (10 slices) and the multiplanar (1-mm interval) method, with a smaller volume using the former method. The limits of agreement were wide between any two of the three methods. In the in-vitro setting, there was a trend towards less valid measurements with the XI VOCAL technique and fewer slices. With the same number of steps, measurements made with VOCAL (12 degrees and 18 degrees) were more valid than were those made with XI VOCAL (15 and 10 slices, respectively).
XI VOCAL cannot be used interchangeably with VOCAL or multiplanar techniques in measuring placental volume at 11-14 weeks' gestation.
比较 XI VOCAL(扩展成像虚拟器官计算机辅助分析)在三维(3D)超声胎盘体积测量中的应用,与使用 VOCAL 的旋转方法和多平面方法进行比较。
我们在 11-14 孕周时采集了 32 例胎儿的 3D 体积数据集。两名观察者分别使用 XI VOCAL(5、10、15 和 20 个切片)、多平面(1mm 间隔)和 VOCAL(12 度、18 度和 30 度旋转)方法对胎盘体积进行了两次测量。此外,还使用三个已知体积的体外模拟物评估了有效性。
所有三种方法的观察者内和观察者间的可靠性均非常高。除 XI VOCAL(10 个切片)和多平面(1mm 间隔)方法之间存在系统偏差外,任何两种方法之间均无系统偏差,前者的体积较小。任何两种方法之间的协议界限都很宽。在体外设置中,XI VOCAL 技术和切片数量较少时,测量的有效性呈下降趋势。在相同的步骤数量下,使用 VOCAL(12 度和 18 度)进行的测量比使用 XI VOCAL(15 度和 10 度)进行的测量更有效。
在 11-14 孕周测量胎盘体积时,XI VOCAL 不能与 VOCAL 或多平面技术互换使用。