Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, Xiamen University, Xiamen, People's Republic of China.
Appl Environ Microbiol. 2010 May;76(9):2778-82. doi: 10.1128/AEM.02558-09. Epub 2010 Mar 5.
A bacterium producing an extracellular bioflocculant was isolated from contaminated LB medium and identified as Bacillus licheniformis by 16S rRNA gene sequencing and its biochemical/physiological characteristics. The optimum culture conditions for flocculant production were an initial medium pH of 7.2 and an inoculum size of 4% (vol/vol). The maximum flocculating activity (700 U/ml) was obtained after cultivation at 37 degrees C for 48 h. Chemical analyses of the purified bioflocculant revealed that it was a proteoglycan composed of 89% carbohydrate and 11% protein (wt/wt). The mass ratio of neutral sugar, amino sugar, and uronic acid was measured at 7.9:4:1. Infrared spectrometry further indicated the presence of carboxyl, hydroxyl, and amino groups, typical of heteropolysaccharide. The average mass of the bioflocculant was calculated to be 1.76 x 10(6) Da. Scanning electron microscopy (SEM) images of the bioflocculant showed an irregular structure with netted texture. Its efficient flocculation capabilities suggest potential applications in industry.
从污染的 LB 培养基中分离出一种产生胞外生物絮凝剂的细菌,并通过 16S rRNA 基因测序及其生化/生理特性鉴定为地衣芽孢杆菌。絮凝剂生产的最佳培养条件为初始培养基 pH 值为 7.2 和接种量为 4%(体积/体积)。在 37°C 培养 48 小时后,可获得最大的絮凝活性(700 U/ml)。对纯化的生物絮凝剂进行化学分析表明,它是一种糖蛋白,由 89%的碳水化合物和 11%的蛋白质组成(质量/质量)。中性糖、氨基糖和糖醛酸的质量比为 7.9:4:1。红外光谱进一步表明存在羧基、羟基和氨基,这是杂多糖的典型特征。生物絮凝剂的平均分子量计算为 1.76 x 10(6) Da。生物絮凝剂的扫描电子显微镜(SEM)图像显示出不规则的结构,具有网状纹理。其高效的絮凝能力表明它在工业中有潜在的应用。