A nation-wide survey of the chemical composition of drinking water in Norway.

Water samples were collected from 384 waterworks that supply 70.9% of the Norwegian population. The samples were collected after water treatment and were analysed for 30 constituents. Although most constituents show wide concentration ranges, Norwegian drinking water is generally soft. The median values obtained are: 0.88 mg Si l-1, 0.06 mg Al l-1, 47 micrograms Fe l-1, 0.69 mg Mg l-1, 2.9 mg Ca l-1, 3.8 mg Na l-1, 6 micrograms Mn l-1, 12 micrograms Cu l-1, 14 micrograms Zn l-1, 9 micrograms Ba l-1, 15 micrograms Sr l-1, 0.14 mg K l-1, 58 micrograms F- l-1, 6.4 mg Cl- l-1, 11 micrograms Br- l-1, 0.46 mg NO3- l-1, 5.3 mg SO4(2-) l-1, 2.4 mg TOC l-1, 6.8 (pH), 5) microseconds cm-1 (conductivity) and 11 mg Pt l-1 (colour). Titanium, Pb, Ni, Co, V, Mo, Cd, Be and Li were seldom or never quantified, due to insufficient sensitivity of the ICP (inductively coupled plasma) method. Norwegian quality criteria, which exist for 17 of the constituents examined, are generally fulfilled, indicating that the chemical quality of drinking water, by and large, is good in Norway. For Fe, Ca, Mn, Cu, pH, TOC and colour, however, the norms for good drinking water are exceeded in more than 9% of the samples, reflecting two of the major problems associated with Norwegian drinking water supplies: (i) many water sources contain high concentrations of humic substances; (ii) in large parts of the country, the waters are soft and acidic, and therefore corrosive towards pipes, plumbing and other installations. Most constituents show marked regional distribution patterns, which are discussed in the light of different mechanisms contributing to the chemical composition of drinking water, namely: chemical weathering of mineral matter; atmospheric supply of salt particles from the sea; anthropogenic pollution (including acid precipitation); corrosion of water pipes and plumbing; water treatment; decomposition of organic matter; and hydrological differences.