Department of Radiation Oncology and Molecular Radiation Sciences, Johns Hopkins University School of Medicine, Baltimore, MD 21231, USA.
Technol Cancer Res Treat. 2010 Dec;9(6):603-17. doi: 10.1177/153303461000900609.
Real-time stereovision-guidance has been introduced for efficient and convenient fractionated stereotactic radiotherapy (FSR) and image-guided intensity-modulated radiation therapy (IMRT). This first pilot study is to clinically evaluate its accuracy and precision as well as impact on treatment doses. Sixty-one FSR patients wearing stereotactic masks (SMs) and nine IMRT patients wearing flexible masks (FMs), were accrued. Daily target reposition was initially based-on biplane-radiographs and then adjusted in six degrees of freedom under real-time stereovision guidance. Mean and standard deviation of the head displacements measured the accuracy and precision. Head positions during beam-on times were measured with real-time stereovisions and used for determination of delivered doses. Accuracy ± ± precision in direction with the largest errors shows improvement from 0.4 ± 2.3 mm to 0.0 ± 1.0 mm in the inferior-to-superior direction for patients wearing SM or from 0.8 ± 4.3 mm to 0.4 ± 1.7 mm in the posterior-to-anterior direction for patients wearing FM. The image-guidance increases target volume coverage by >30% for small lesions. Over half of head position errors could be removed from the stereovision-guidance. Importantly, the technique allows us to check head position during beam-on time and makes it possible for having frameless head refixation without tight masks.
实时立体视觉引导已被引入,以实现高效、便捷的分次立体定向放射治疗(FSR)和图像引导调强放射治疗(IMRT)。这项初步的临床研究旨在评估其准确性和精密度,以及对治疗剂量的影响。共有 61 名佩戴立体定位面罩(SM)的 FSR 患者和 9 名佩戴柔性面罩(FM)的 IMRT 患者参与了此项研究。最初,在双平面射线照相的基础上进行每日靶区重定位,然后在实时立体视觉引导下进行六自由度调整。头部位移的平均值和标准差衡量了准确性和精密度。通过实时立体视觉测量射束照射期间的头部位移,并用于确定实际剂量。对于佩戴 SM 的患者,在上下方向上,从最大误差的 0.4 ± 2.3mm 改善到 0.0 ± 1.0mm;对于佩戴 FM 的患者,在前后方向上,从最大误差的 0.8 ± 4.3mm 改善到 0.4 ± 1.7mm,准确性(±标准差)得到了改善。图像引导技术使小病变的靶区覆盖率提高了>30%。超过一半的头部位移误差可以通过立体视觉引导来消除。重要的是,该技术使我们能够在射束照射期间检查头部位移,并使无框架头重固定成为可能,而无需紧密面罩。