Department of Anesthesiology, University of Lübeck, Ratzeburger Allee 160, D-23538 Lübeck, Germany.
Br J Anaesth. 2011 Apr;106(4):475-81. doi: 10.1093/bja/aeq372. Epub 2010 Dec 31.
Pulse-contour analysis method (PCM) cardiac output (CO) monitors are increasingly used for CO monitoring during anaesthesia and in the critically ill. Very recently, several systems have been introduced that do not need calibration; among them the pressure recording analytical method (PRAM). Sparse data comparing the accuracy of the PRAM-CO with conventional thermodilution CO (ThD-CO) in cardiac surgery patients are available.
In this prospective comparison study, paired CO measurements with a pulmonary artery catheter and a PRAM monitoring set were obtained 20-30 min apart (t1, t2) in 23 extubated patients on the first postoperative day after cardiac surgery. Data were analysed by the Bland-Altman method.
A total of 46 paired CO measurements (23 for each interval) were collected. The Bland-Altman analysis showed a mean difference (bias) of 0.0 litre min(-1) and limits of agreement (1.96 sd) of 4.53 to -4.54 litre min(-1) [upper 95% confidence interval (CI), 3.26-5.80; lower 95% CI, -5.8 to -3.27]. The percentage error (1.96 sd/mean of the reference method) was 87%.
These results question the reliability of the PRAM technology for the determination of CO in postoperative cardiac surgery patients.
脉搏轮廓分析方法(PCM)心输出量(CO)监测仪在麻醉和危重病患者的 CO 监测中越来越多地被使用。最近,已经引入了几种不需要校准的系统,其中包括压力记录分析方法(PRAM)。在心脏手术患者中,比较 PRAM-CO 与传统热稀释 CO(ThD-CO)准确性的稀疏数据已经可用。
在这项前瞻性比较研究中,在心脏手术后的第一个术后天,在 23 名已拔管的患者中,每隔 20-30 分钟(t1、t2)使用肺动脉导管和 PRAM 监测仪进行成对的 CO 测量。数据通过 Bland-Altman 方法进行分析。
共收集了 46 对 CO 测量值(每个间隔 23 个)。Bland-Altman 分析显示平均差异(偏差)为 0.0 升/分钟,一致性界限(1.96 sd)为 4.53 至-4.54 升/分钟[上限 95%置信区间(CI),3.26-5.80;下限 95%CI,-5.8 至-3.27]。误差百分比(1.96 sd/参考方法的平均值)为 87%。
这些结果对 PRAM 技术在心脏手术后患者 CO 测定中的可靠性提出了质疑。