Department of Biomedical Engineering University of Rochester, Rochester, NY, USA.
IEEE Trans Ultrason Ferroelectr Freq Control. 2011 Jan;58(1):102-11. doi: 10.1109/TUFFC.2011.1777.
We present a novel method for ultrasound backscatter image formation wherein lateral resolution of the target is obtained by using traveling shear waves to encode the lateral position of targets in the phase of the received echo. We demonstrate that the phase modulation as a function of shear wavenumber can be expressed in terms of a Fourier transform of the lateral component of the target echogenicity. The inverse transform, obtained by measurements of the phase modulation over a range of shear wave spatial frequencies, yields the lateral scatterer distribution. Range data are recovered from time of flight as in conventional ultrasound, yielding a B-mode-like image. In contrast to conventional ultrasound imaging, where mechanical or electronic focusing is used and lateral resolution is determined by aperture size and wavelength, we demonstrate that lateral resolution using the proposed method is independent of the properties of the aperture. Lateral resolution of the target is achieved using a stationary, unfocused, single-element transducer. We present simulated images of targets of uniform and non-uniform shear modulus. Compounding for speckle reduction is demonstrated. Finally, we demonstrate image formation with an unfocused transducer in gelatin phantoms of uniform shear modulus.
我们提出了一种新的超声背散射成像方法,通过使用传播的剪切波对目标的横向位置进行编码,从而获得目标的横向分辨率。我们证明,作为剪切波数函数的相位调制可以表示为目标声反射性的横向分量的傅里叶变换。通过测量相位调制在一系列剪切波空间频率下的变化,可以获得逆变换,从而得到横向散射体的分布。通过飞行时间恢复距离数据,就像在传统超声中一样,得到类似于 B 模式的图像。与传统的超声成像不同,传统的超声成像使用机械或电子聚焦,横向分辨率由孔径大小和波长决定,我们证明使用所提出的方法的横向分辨率与孔径的特性无关。通过使用静止、无焦点、单个元件的换能器来实现目标的横向分辨率。我们展示了均匀和非均匀剪切模量目标的模拟图像。证明了用于减少斑点的复合。最后,我们在均匀剪切模量的明胶体模中演示了无焦点换能器的图像形成。