Neifar Mohamed, Jaouani Atef, Kamoun Amel, Ellouze-Ghorbel Raoudha, Ellouze-Chaabouni Semia
Unité Enzymes et Bioconversion, Ecole Nationale d'Ingénieurs de Sfax, Université de Sfax, Route de Soukra, Sfax 3038, Tunisia.
Enzyme Res. 2011;2011:179050. doi: 10.4061/2011/179050. Epub 2011 Aug 2.
The decolorization of direct Solophenyl red 3BL (SR), a polyazo dye extensively used in textile industry was studied. The Fomes fomentarius laccase alone did not decolorize SR. The natural redox mediator, acetosyringone (AS), was necessary for decolorization to occur. Box-Behnken design was used to evaluate the effects of three parameters, namely, enzyme concentration (0.5-2.5 U mL(-1)), redox mediator concentration (3-30 μM), and incubation time (1-24 h), on the SR decolorization yield. The fitted mathematical model allowed us to plot response surfaces as well as isoresponse curves and to determine optimal decolorization conditions. The results clearly indicated that the AS concentration was the main factor influencing the SR decolorization yield. The selected optimal conditions were enzyme concentration 0.8 U mL(-1), mediator concentration 33 μM, and time 14 h 30 min. These conditions allowed 79.66% of SR decolorization versus 80.70% for the predicted value. These results showed a promising future of applying laccase-AS system for industrial wastewater bioremediation.
研究了直接索罗菲尼尔红3BL(SR)的脱色情况,SR是一种广泛应用于纺织工业的多偶氮染料。仅皱盖乌芝漆酶不能使SR脱色。天然氧化还原介质乙酰丁香酮(AS)是发生脱色所必需的。采用Box-Behnken设计评估了酶浓度(0.5 - 2.5 U mL⁻¹)、氧化还原介质浓度(3 - 30 μM)和孵育时间(1 - 24 h)这三个参数对SR脱色率的影响。拟合的数学模型使我们能够绘制响应面和等响应曲线,并确定最佳脱色条件。结果清楚地表明,AS浓度是影响SR脱色率的主要因素。所选的最佳条件为酶浓度0.8 U mL⁻¹、介质浓度33 μM和时间14 h 30 min。在这些条件下,SR的脱色率为79.66%,而预测值为80.70%。这些结果表明漆酶 - AS系统在工业废水生物修复方面具有广阔的应用前景。