Suppr超能文献

通过计算机断层扫描评估桡骨远端关节内骨折。

Intra-articular fractures of the distal radius evaluated by computed tomography.

作者信息

Tanabe Katsuhisa, Nakajima Takaya, Sogo Eiji, Denno Kakuro, Horiki Mitsuru, Nakagawa Reiko

机构信息

Department of Orthopaedic Surgery, Nishinomiya Municipal Central Hospital, Nishinomiya, Japan.

出版信息

J Hand Surg Am. 2011 Nov;36(11):1798-803. doi: 10.1016/j.jhsa.2011.08.021. Epub 2011 Oct 5.

Abstract

PURPOSE

To describe the fracture lines of intra-articular distal radius fractures as evaluated by computed tomography scans.

METHODS

With computed tomography, we examined 95 intra-articular fractures of the distal radius from 91 patients. Multiplanar computed tomography images or 3-dimensional images, or both, were assessed. We divided the periphery of the distal articular surface of the distal radius into 6 segments (sigmoid notch, dorsoulnar, dorsoradial, volar radial, volar ulnar, radial styloid) and examined which segment had fracture lines. For fractures involving the sigmoid notch, we divided them by the location and the direction of the fracture lines entering the sigmoid notch. Next, we categorized the fractures into 3 fracture groups (extension group, neutral group, and flexion group) by the dorsal or volar angulation of the cortex of the distal radius. In all the fractures and in each of the 3 fracture groups, we described the frequency of the fracture lines in each segment and the number of the segments with fracture lines. The location and the direction of the fracture lines in the sigmoid notch were analyzed in each of the 3 fracture groups.

RESULTS

The most frequent fracture type, seen in 21% of all fractures, had fracture lines in the sigmoid notch and the dorsoulnar segment. The frequency of the fracture lines was 77% in the sigmoid notch, 71% in the dorsoulnar segment, and 57% in the dorsoradial segment. The volar ulnar segment was lowest in frequency, at 13%. The fractures in the extension group were more common in the dorsoulnar segment and less common in the dorsoradial segment and the radial styloid segment. The scaphoid facet always had a fracture in the flexion or neutral group. In the extension group, the direction of the fracture lines from the sigmoid notch was dorsoradial or parallel to the volar articular edge. In contrast, the direction was parallel or volar radial compared to the volar articular edge in the flexion group.

CONCLUSIONS

We documented the location and the direction of intra-articular fracture lines of the distal radius. The location and the direction of fractures showed different tendencies related to the volar/dorsal angulation of the distal radius.

CLINICAL RELEVANCE

The findings might help in the evaluation, classification, and treatment of intra-articular fractures of the distal radius.

摘要

目的

描述通过计算机断层扫描评估的桡骨远端关节内骨折的骨折线情况。

方法

我们利用计算机断层扫描检查了91例患者的95处桡骨远端关节内骨折。对多平面计算机断层扫描图像或三维图像,或两者进行评估。我们将桡骨远端关节面的周边分为6个节段(乙状切迹、背尺侧、背桡侧、掌桡侧、掌尺侧、桡骨茎突),并检查哪个节段有骨折线。对于累及乙状切迹的骨折,我们根据进入乙状切迹的骨折线的位置和方向进行划分。接下来,我们根据桡骨远端皮质的背侧或掌侧成角情况将骨折分为3个骨折组(伸展组、中立组和屈曲组)。在所有骨折以及3个骨折组中的每一组中,我们描述了每个节段骨折线的频率以及有骨折线的节段数量。对3个骨折组中的每一组,分析了乙状切迹内骨折线的位置和方向。

结果

最常见的骨折类型(占所有骨折的21%)在乙状切迹和背尺侧节段有骨折线。骨折线的频率在乙状切迹为77%,背尺侧节段为71%,背桡侧节段为57%。掌尺侧节段频率最低,为13%。伸展组的骨折在背尺侧节段更常见,在背桡侧节段和桡骨茎突节段较少见。舟状骨小面在屈曲组或中立组总是有骨折。在伸展组中,来自乙状切迹的骨折线方向是背桡侧或与掌侧关节边缘平行。相比之下,在屈曲组中,该方向与掌侧关节边缘相比是平行或掌桡侧的。

结论

我们记录了桡骨远端关节内骨折线的位置和方向。骨折的位置和方向显示出与桡骨远端掌侧/背侧成角相关的不同趋势。

临床意义

这些发现可能有助于桡骨远端关节内骨折的评估、分类和治疗。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验