Department of Agri-food Industry, Food and Nutrition, "Luiz de Queiroz" College of Agriculture, University of Sao Paulo, Piracicaba, Sao Paulo, Brazil.
J Ind Microbiol Biotechnol. 2012 Mar;39(3):439-47. doi: 10.1007/s10295-011-1051-3. Epub 2011 Nov 12.
Sugarcane bagasse was characterized as a feedstock for the production of ethanol using hydrothermal pretreatment. Reaction temperature and time were varied between 160 and 200°C and 5-20 min, respectively, using a response surface experimental design. The liquid fraction was analyzed for soluble carbohydrates and furan aldehydes. The solid fraction was analyzed for structural carbohydrates and Klason lignin. Pretreatment conditions were evaluated based on enzymatic extraction of glucose and xylose and conversion to ethanol using a simultaneous saccharification and fermentation scheme. SSF experiments were conducted with the washed pretreated biomass. The severity of the pretreatment should be sufficient to drive enzymatic digestion and ethanol yields, however, sugars losses and especially sugar conversion into furans needs to be minimized. As expected, furfural production increased with pretreatment severity and specifically xylose release. However, provided that the severity was kept below a general severity factor of 4.0, production of furfural was below an inhibitory concentration and carbohydrate contents were preserved in the pretreated whole hydrolysate. There were significant interactions between time and temperature for all the responses except cellulose digestion. The models were highly predictive for cellulose digestibility (R (2) = 0.8861) and for ethanol production (R (2) = 0.9581), but less so for xylose extraction. Both cellulose digestion and ethanol production increased with severity, however, high levels of furfural generated under more severe pretreatment conditions favor lower severity pretreatments. The optimal pretreatment condition that gave the highest conversion yield of ethanol, while minimizing furfural production, was judged to be 190°C and 17.2 min. The whole hydrolysate was also converted to ethanol using SSF. To reduce the concentration of inhibitors, the liquid fraction was conditioned prior to fermentation by removing inhibitory chemicals using the fungus Coniochaeta ligniaria.
甘蔗渣被用作生产乙醇的原料,采用水热预处理。使用响应面实验设计,在 160-200°C 之间变化反应温度,在 5-20 分钟之间变化反应时间。分析了液体部分的可溶性碳水化合物和呋喃醛。分析了固体部分的结构碳水化合物和 Klason 木质素。根据酶法提取葡萄糖和木糖,并采用同步糖化发酵方案转化为乙醇,对预处理条件进行了评价。用预处理后的生物质进行了 SSF 实验。预处理的剧烈程度应足以促进酶解和乙醇产率,然而,糖的损失,特别是糖转化为呋喃,需要最小化。如预期的那样,糠醛的产量随预处理的剧烈程度而增加,特别是木糖的释放。然而,只要将剧烈程度保持在一般剧烈因子 4.0 以下,糠醛的产量就低于抑制浓度,并且预处理的整个水解物中的碳水化合物含量得以保留。除了纤维素消化外,所有反应的时间和温度之间都存在显著的相互作用。这些模型对纤维素消化率(R (2) = 0.8861)和乙醇产率(R (2) = 0.9581)具有高度的预测性,但对木糖提取的预测性较差。纤维素消化和乙醇产率都随剧烈程度的增加而增加,然而,在更剧烈的预处理条件下生成的高浓度糠醛有利于更温和的预处理。判断最高转化率和最小化糠醛生成的最佳预处理条件是 190°C 和 17.2 分钟。也使用 SSF 将整个水解物转化为乙醇。为了降低抑制剂的浓度,在发酵前通过使用真菌 Coniochaeta ligniaria 去除抑制性化学物质对液体部分进行了调节。