Le2i-UMR CNRS 6306, Université de Bourgogne, Le Creusot, France.
Med Image Anal. 2012 Aug;16(6):1259-79. doi: 10.1016/j.media.2012.04.006. Epub 2012 May 15.
This paper presents a novel method for non-rigid registration of transrectal ultrasound and magnetic resonance prostate images based on a non-linear regularized framework of point correspondences obtained from a statistical measure of shape-contexts. The segmented prostate shapes are represented by shape-contexts and the Bhattacharyya distance between the shape representations is used to find the point correspondences between the 2D fixed and moving images. The registration method involves parametric estimation of the non-linear diffeomorphism between the multimodal images and has its basis in solving a set of non-linear equations of thin-plate splines. The solution is obtained as the least-squares solution of an over-determined system of non-linear equations constructed by integrating a set of non-linear functions over the fixed and moving images. However, this may not result in clinically acceptable transformations of the anatomical targets. Therefore, the regularized bending energy of the thin-plate splines along with the localization error of established correspondences should be included in the system of equations. The registration accuracies of the proposed method are evaluated in 20 pairs of prostate mid-gland ultrasound and magnetic resonance images. The results obtained in terms of Dice similarity coefficient show an average of 0.980±0.004, average 95% Hausdorff distance of 1.63±0.48 mm and mean target registration and target localization errors of 1.60±1.17 mm and 0.15±0.12 mm respectively.
本文提出了一种新的基于统计形状上下文的点对应非线性正则化框架的经直肠超声和磁共振前列腺图像的非刚性配准方法。分割的前列腺形状由形状上下文表示,形状表示之间的巴氏距离用于在 2D 固定和移动图像之间找到点对应。配准方法涉及多模态图像之间的非线性仿射变换的参数估计,其基础是求解一组薄板样条的非线性方程。该解是通过在固定和移动图像上积分一组非线性函数来构建的过定系统的最小二乘解。然而,这可能不会导致解剖目标的临床可接受的变换。因此,薄板样条的正则化弯曲能以及已建立对应关系的定位误差应包含在方程组中。该方法的配准精度在 20 对前列腺中部超声和磁共振图像中进行了评估。以骰子相似系数表示的结果显示平均为 0.980±0.004,平均 95% Hausdorff 距离为 1.63±0.48mm,平均目标注册和目标定位误差分别为 1.60±1.17mm 和 0.15±0.12mm。