Bodin F, Ganeval A, Lutz J-C, Zink S, Wilk A, Bruant-Rodier C
Service de chirurgie plastique reconstructrice et esthétique, hôpital civil, hôpitaux universitaires de Strasbourg, 1, place de l'Hôpital, BP n(o) 426, 67091 Strasbourg cedex, France.
Ann Chir Plast Esthet. 2012 Aug;57(4):323-7. doi: 10.1016/j.anplas.2012.05.005. Epub 2012 Jun 27.
The quality of microsurgical sutures is a key to success in free flaps. Automatic devices are meant to improve safety and simplify microvascular anastomoses. We present the assessment of our clinical experience using automatic suture based on double ring eversion system.
This system has been tested during an eighteen months period, in 72 consecutive venous end to end anastomoses. This technical innovation was used in 58 free flaps on a total of 52 patients. Indication for free flap was breast reconstruction (n=40), facial reconstruction (n=14), abdominal and limb reconstruction (n=4). Assessment was based on efficiency, anastomosis time, and thrombosis ratio in venous sutures.
The mechanical system made microsurgical procedure easier. It notably decreased coupling time compared to manual sutures. At the beginning, coupling time averaged eight minutes. It decreased to five minutes for the last ten cases. In our series, we noticed two venous thromboses (2.7%). In every case, emergency revision surgery allowed saving the flap. Thrombosis did not seem specifically due to the mechanical system.
Our positive experience together with good outcome published throughout literature lead us to routinely use double ring-based automatic suture. We chose this system in first line for every venous end to end anastomoses regardless of indication.
显微外科缝线的质量是游离皮瓣手术成功的关键。自动装置旨在提高安全性并简化微血管吻合。我们展示了基于双环外翻系统的自动缝线临床应用经验评估。
该系统在18个月期间进行了测试,连续用于72例静脉端端吻合。这项技术创新应用于52例患者的58个游离皮瓣。游离皮瓣的适应证为乳房重建(n = 40)、面部重建(n = 14)、腹部和肢体重建(n = 4)。评估基于效率、吻合时间和静脉缝线的血栓形成率。
机械系统使显微外科手术更简便。与手工缝线相比,显著缩短了吻合时间。开始时,吻合时间平均为8分钟。最后10例降至5分钟。在我们的系列病例中,发现2例静脉血栓形成(2.7%)。每例均通过急诊翻修手术挽救了皮瓣。血栓形成似乎并非特别由机械系统导致。
我们的积极经验以及文献中报道的良好结果促使我们常规使用基于双环的自动缝线。无论适应证如何,我们首选该系统进行所有静脉端端吻合。