Department of Medical and Health Sciences, Linköping University, Sweden.
Int J Inj Contr Saf Promot. 2012;19(3):249-59. doi: 10.1080/17457300.2012.692692. Epub 2012 Jul 5.
An extensive research project concerning injury prevention was planned and initiated in Motala Municipality in the early 1980s. This article summarises 25 years of work for injury prevention and safety promotion in Motala. Evaluation of both process and effect were conducted based on a quasi-experimental study design, as well as cost-effectiveness and cost-benefit analyses of interventions. Initial evaluations results showed an annual incidence of injuries of 118.9/1000 citizens in 1983/1984 consisting of injuries at home (35%), sports injuries (18.9%), injuries at work (13.7%), traffic-related injuries (12.8%) and other injuries (19.5%). The annual social economic costs of injuries were estimated at 116 million Swedish crowns (SEK). By 1989, after two years of preventive work, the incidence of injuries was reduced by 13%. The greatest decrease was among the moderate severity category of injuries (41%). The social economic costs were thereby reduced by 21 million SEK per year. Since then, work with injury prevention has continued and annual evaluations have shown that the incidence of injuries, with some fluctuation, has continued to decrease up to the latest evaluation in 2008. The total decrease during the study period was 37%. This study shows that community-based injury prevention work according to the Safe Community model is a successful and cost-effective way of reducing injuries in the local community.
一项关于伤害预防的广泛研究计划于 20 世纪 80 年代初在莫塔拉市启动。本文总结了莫塔拉市 25 年来在伤害预防和安全促进方面的工作。基于准实验研究设计,对干预措施的过程和效果进行了评估,同时还进行了成本效益和成本效益分析。初步评估结果显示,1983/1984 年,莫塔拉市的伤害年发病率为每 1000 名居民 118.9 例,包括家庭伤害(35%)、运动伤害(18.9%)、工作场所伤害(13.7%)、交通相关伤害(12.8%)和其他伤害(19.5%)。伤害的年社会经济成本估计为 1.16 亿瑞典克朗(SEK)。经过两年的预防工作,到 1989 年,伤害发病率下降了 13%。中度严重程度类别的伤害下降幅度最大(41%)。每年的社会经济成本因此减少了 2100 万瑞典克朗。此后,伤害预防工作一直在继续,每年的评估都表明,伤害发病率在波动中持续下降,直到 2008 年的最新评估。研究期间总降幅为 37%。本研究表明,基于安全社区模式的社区伤害预防工作是减少当地社区伤害的一种成功且具有成本效益的方法。