Laboratory of Separation and Reaction Engineering (LSRE), Associate Laboratory LSRE/LCM, Departamento de Engenharia Química, Faculdade de Engenharia, Universidade do Porto, Rua do Dr. Roberto Frias, 4200-465, Porto, Portugal.
World J Microbiol Biotechnol. 2012 Sep;28(9):2827-38. doi: 10.1007/s11274-012-1092-4. Epub 2012 Jun 6.
Commercial laccase formulation was immobilized on modified green coconut fiber silanized with 3-glycidoxypropyltrimethoxysilane, aiming to achieve a cheap and effective biocatalyst. Two different strategies were followed: one point (pH 7.0) and multipoint (pH 10.0) covalent attachment. The influence of immobilization time on enzymatic activity and the final reduction with sodium borohydride were evaluated. The highest activities were achieved after 2 h of contact time in all situations. Commercial laccase immobilized at pH 7.0 was found to have higher activity and higher affinity to the substrate. However, the immobilization by multipoint covalent attachment improved the biocatalyst thermal stability at 50 °C, when compared to soluble enzyme and to the immobilized enzyme at pH 7.0. The Schiff's bases reduction by sodium borohydride, in spite of causing a decrease in enzyme activity, showed to contribute to the increase of operational stability through bonds stabilization. Finally, these immobilized enzymes showed high efficiency in the continuous decolourization of reactive textile dyes. In the first cycle, the decolourization is mainly due to dyes adsorption on the support. However, when working in successive cycles, the adsorption capacity of the support decreases (saturation) and the enzymatic action increases, indicating the applicability of this biocatalyst for textile wastewater treatment.
商业漆酶制剂通过与 3-缩水甘油丙基三甲氧基硅烷硅烷化的改性绿椰纤维固定化,旨在实现廉价且有效的生物催化剂。采用两种不同的策略:单点(pH7.0)和多点(pH10.0)共价附着。评估了固定化时间对酶活性和最终用硼氢化钠还原的影响。在所有情况下,接触 2 小时后,商业漆酶的固定化达到了最高活性。在 pH7.0 下固定化的商业漆酶表现出更高的活性和对底物的更高亲和力。然而,多点共价附着的固定化提高了生物催化剂在 50°C 时的热稳定性,与可溶性酶和在 pH7.0 下固定化的酶相比。尽管硼氢化钠还原席夫碱会降低酶活性,但通过稳定键,它显示出有助于提高操作稳定性。最后,这些固定化酶在连续脱色反应性纺织染料方面表现出高效率。在第一个循环中,脱色主要是由于染料吸附在载体上。然而,在连续循环中,载体的吸附能力下降(饱和),酶的作用增加,表明该生物催化剂适用于纺织废水处理。