[The materials engineering characteristics of orthodontic nickel-titanium wires].

Since their introduction in 1971 nickel-titanium wires have been widely used in orthodontics. Today, there is a multitude of new NiTi-alloys, whose properties are described. Beside the memory effect, these alloys have particular elastic properties, which can be characterized by a low modulus of elasticity, excellent springback, and pseudoelasticity (superelasticity). These properties are a consequence of the fact that depending on temperature and mechanical stress NiTi-alloys have two crystalline structures: martensite and austenite. The transition between these two phases, called martensitic transformation, is responsible for the memory effect, where a one way and a two way effect can be distinguished. For orthodontic applications pseudoelasticity is regarded as a highly favourable property. Pseudoelastic behavior is caused by stress induced martensite. Analysing the elastic properties of the available wires two categories can be distinguished: "work hardened martensite" and "pseudoelastic alloy". The biocompatibility of NiTi is sufficient, it can be used as an implant material.