Patency and healing of polymeric microvenous prostheses implanted into the rat femoral vein by means of the sleeve anastomotic technique.

The sleeve anastomotic technique was used to enhance the longer term patency and healing of polyurethane-based (PU) microvenous prostheses (ID: 1 mm, length: 5 mm, wall thickness: 0.2 mm; n = 34) in the rat femoral vein. In the control group, PU prostheses (n = 12) were implanted by means of the conventional end-to-end technique, and all were found to be occluded after one day (n = 6) and three weeks (n = 6). In the other experimental groups, the prostheses were evaluated after one day (n = 6), three weeks (n = 10), and six weeks (n = 18) of implantation by means of routine light- and scanning-electron microscopy. The occluded prostheses in the control group demonstrated a firmly attached mural thrombus at the anastomoses at one day and a completely organized thrombus at three weeks after implantation. Thirty-one of the 34 PU prostheses implanted by means of the sleeve technique were patent. At one day, all patent PU prostheses (five out of six) demonstrated minimal thrombus accumulation and a smooth transition at the anastomotic sites. At three and six weeks, all patent PU prostheses (16 out of 18) were covered by a complete endothelial layer. Underneath the endothelial layer, a subendothelial layer, composed of two to four layers of smooth muscle cells, could be observed. The wall of the prostheses were penetrated by fibrohistiocytic tissue. Stenosis was not observed. These results demonstrate that the sleeve anastomotic technique not only improves the short-term patency of PU microvenous conduits, but also the longer-term patency rate.(ABSTRACT TRUNCATED AT 250 WORDS)