Molecular Imaging Laboratory, MGH/MIT/HMS Athinoula A. Martinos Center for Biomedical Imaging, Department of Radiology, Massachusetts General Hospital/Harvard Medical School, Charlestown, Massachusetts, United States of America.
PLoS One. 2013 Apr 24;8(4):e62007. doi: 10.1371/journal.pone.0062007. Print 2013.
Brown adipose tissue (BAT), a specialized tissue for thermogenesis, plays important roles for metabolism and energy expenditure. Recent studies validated BAT's presence in human adults, making it an important re-emerging target for various pathologies. During this validation, PET images with (18)F-FDG showed significant uptake of (18)F-FDG by BAT under certain conditions. Here, we demonstrated that Cerenkov luminescence imaging (CLI) using (18)F-FDG could be utilized for in vivo optical imaging of BAT in mice.
Mice were injected with (18)F-FDG and imaged 60 minutes later with open filter and 2 minute acquisition. In vivo activation of BAT was performed by norepinephrine and cold treatment under isoflurane or ketamine anesthesia. Spectral unmixing and 3D imaging reconstruction were conducted with multiple-filter CLI images.
CLI with (18)F-FDG is a feasible and reliable method for imaging BAT in mice. Compared to PET imaging, CLI is significantly cheaper, faster for 2D planar imaging and easier to use. We believe that this method could be used as an important tool for researchers investigating BAT.
棕色脂肪组织(BAT)是一种专门的产热组织,在代谢和能量消耗中发挥着重要作用。最近的研究证实了成人中 BAT 的存在,使其成为各种病理的一个重要新兴靶点。在这一验证过程中,使用(18)F-FDG 的 PET 图像显示,在某些条件下,BAT 会显著摄取(18)F-FDG。在这里,我们证明了使用(18)F-FDG 的切伦科夫发光成像(CLI)可用于小鼠 BAT 的体内光学成像。
小鼠注射(18)F-FDG 后,在开滤波器下 60 分钟进行成像,采集时间为 2 分钟。在异氟烷或氯胺酮麻醉下,通过去甲肾上腺素和冷处理激活 BAT。通过多滤波器 CLI 图像进行光谱解混和 3D 成像重建。
1)使用 CLI 与(18)F-FDG 对小鼠肩胛间 BAT 进行成像在技术上是可行的,85%以上的信号(>85%)来自肩胛间部位的 BAT;2)该方法是可靠的,因为在体内 CLI、离体 CLI 和离体放射性之间观察到了极好的相关性;3)CLI 可用于监测不同条件下的 BAT 激活;4)与长期麻醉组相比,短期异氟烷麻醉组的 CLI 信号明显更高;5)BAT 经光谱解混后,CLI 光谱的峰值在 640nm 处,反映了 BAT 的实际情况;6)最后,3D 重建图像显示,光信号的来源与 BAT 的位置和物理形状之间具有极好的相关性。
使用(18)F-FDG 的 CLI 是一种在小鼠中对 BAT 成像的可行且可靠的方法。与 PET 成像相比,CLI 更便宜,2D 平面成像速度更快,使用也更简单。我们相信,这种方法可以作为研究 BAT 的研究人员的重要工具。