Bartolí Ramon, Boix Jaume, Odena Gemma, De la Ossa Napoleón D, de Vega Vicente Moreno, Lorenzo-Zúñiga Vicente
Ramon Bartolí, Gemma Ódena, Vicente Lorenzo-Zúñiga, Centro de Investigación Biomédica en Red de Enfermedades Hepáticas y Digestivas (CIBEREHD), 08916 Badalona, Spain.
World J Gastrointest Endosc. 2013 May 16;5(5):226-30. doi: 10.4253/wjge.v5.i5.226.
To describe colon anatomy with colonoscopy and computed tomography (CT) to develop a rat model for future studies of therapeutic colonoscopy.
Eighteen male Sprague-Dawley rats, on average 400-420 g, underwent total colonoscopy, CT and histological examination. Colonoscopy was performed after bowel preparation with a baby upper gastrointestinal endoscopy with an outer diameter of 6.7 mm. CT obtained a 3D image of total colon after a rectal enema with radiological contrast. Macroscopic and microscopic examinations were examined with a conventional technique (hematoxylin and eosin). Colonic wall thickness, length and diameter measurements were taken from the anus, 3, 7, 14 and 20 cm from the anal margin.
The median colonoscope depth was 24 cm (range 20-28 cm). Endoscopic and tomographic study of colon morphology showed an easy access with tubular morphology in the entire left colon (proximal left colon and rectum). Transverse colon was unapparent on colonoscopy. Right colon, proximal to the splenic flexure, was the largest part of the colon and assumed saccular morphology with tangential trabecula. Radiological measurements of the colonic length and diameter substantiate a subdivision of the right colon into two parts, the cecum and distal right colon. In addition, histological measurement of the colonic wall thickness confirmed a progressive decrease from rectum to cecum. The muscular layer was thinner in the proximal left colon.
The combination of colonoscopy, tomography and histology leads to a better characterization of the entire colon. These data are important for deciding when to perform endoscopic resections or when to induce perforations to apply endoscopic treatments.
通过结肠镜检查和计算机断层扫描(CT)描述结肠解剖结构,以建立用于未来治疗性结肠镜研究的大鼠模型。
18只平均体重400 - 420克的雄性Sprague-Dawley大鼠接受了全结肠镜检查、CT检查和组织学检查。在肠道准备后,使用外径为6.7毫米的小儿上消化道内窥镜进行结肠镜检查。CT在直肠注入放射造影剂后获得全结肠的三维图像。采用常规技术(苏木精和伊红)进行宏观和微观检查。从肛门、距肛门边缘3厘米、7厘米、14厘米和20厘米处测量结肠壁厚度、长度和直径。
结肠镜的中位深度为24厘米(范围20 - 28厘米)。结肠形态的内镜和断层扫描研究显示,整个左半结肠(左半结肠近端和直肠)呈管状形态,易于进入。结肠镜检查时横结肠不明显。脾曲近端的右半结肠是结肠最大的部分,呈囊状形态,有切向小梁。结肠长度和直径的放射学测量证实右半结肠可分为两部分,即盲肠和右半结肠远端。此外,结肠壁厚度的组织学测量证实从直肠到盲肠逐渐变薄。左半结肠近端的肌层较薄。
结肠镜检查、断层扫描和组织学检查相结合能更好地描述整个结肠的特征。这些数据对于决定何时进行内镜切除或何时诱导穿孔以应用内镜治疗很重要。