Department of Chemistry, Sri Venkateswara University, Tirupati, India.
Spectrochim Acta A Mol Biomol Spectrosc. 2013 Dec;116:17-25. doi: 10.1016/j.saa.2013.06.045. Epub 2013 Jul 11.
Zerovalent iron nanoparticles (ZVNI) were synthesized using a rapid, single step and completely green synthetic method from the leaf extracts of Eucalyptus globules and were characterized using the techniques Scanning Electron Microscopy (SEM), UV-Vis Spectroscopy, Fourier Transform-Infrared Spectroscopy (FT-IR), X-ray Diffraction (XRD) and Zeta potential measurement. The FT-IR analysis reveals that the polyphenolic compounds present in the leaf extract may be responsible for the reduction and stabilization of the ZVNI. These nanoparticles were utilized for the adsorption of hexavalent chromium (Cr (VI)) and the concentration of Cr (VI) was determined using UV-Vis spectrometer after treating with ZVNI. Response and surface contour plots were drawn with the help of Mini-tab software to explain the adsorption of Cr (VI). The adsorption efficiency of Cr (VI) reaches to the highest value (98.1%) when the reaction time was about 30 min. and the ZVNI dosage was 0.8 g/L. The effective parameters such as adsorbent (ZVNI) dosage, initial Cr (VI) concentration and the kinetics were also examined.
零价铁纳米粒子(ZVNI)是使用从桉树 globules 叶提取物中快速、一步法和完全绿色的合成方法合成的,并使用扫描电子显微镜(SEM)、紫外可见光谱、傅里叶变换红外光谱(FT-IR)、X 射线衍射(XRD)和 Zeta 电位测量技术进行了表征。FT-IR 分析表明,叶提取物中存在的多酚化合物可能是 ZVNI 还原和稳定的原因。这些纳米粒子被用于吸附六价铬(Cr(VI)),并用 ZVNI 处理后,使用紫外可见分光光度计测定 Cr(VI)的浓度。借助 Mini-tab 软件绘制响应和表面等高线图,以解释 Cr(VI)的吸附情况。当反应时间约为 30 分钟,ZVNI 用量为 0.8g/L 时,Cr(VI)的吸附效率达到最高值(98.1%)。还研究了有效参数,如吸附剂(ZVNI)用量、初始 Cr(VI)浓度和动力学。