School of Life Science and Biotechnology, Dalian University of Technology, Dalian 116024, People's Republic of China.
Food Chem. 2013 Dec 15;141(4):3317-22. doi: 10.1016/j.foodchem.2013.06.012. Epub 2013 Jun 13.
Feruloylated lysophospholipids (FLPs) were firstly synthesized from phosphatidylcholine (PC) and ethyl ferulate (EF) using lipase-catalysed interesterification in selected solvents at controlled water content. Kinds of lipases and single solvents were screened. Novozym 435 and toluene were found to be the suitable biocatalyst and solvent, respectively. Then tert-butanol, n-butanol, chloroform, isopropanol, acetone and DMSO were respectively added into toluene in order to increase conversion of products. The results showed that toluene/chloroform could significantly increase the conversion and the optimal combination of toluene and chloroform was 90:10 (v/v). The optimal conditions generated for FLPs production were a substrate molar ratio of 5:1 (PC/EF), a PC's hydrolytic time of 1.5h, an enzyme load of 60 mg/ml, a solvent dosage of 5 ml and a molecular sieves concentration (4Å) of 100mg/ml. Under these conditions, 40.51% of EF can be converted to FLPs, which were identified by TLC and HPLC-MS.
阿魏酰溶血磷脂(FLPs)最初是通过脂肪酶催化的在控制水含量的特定溶剂中从磷脂酰胆碱(PC)和阿魏酸乙酯(EF)进行酯交换反应合成的。筛选了各种脂肪酶和单一溶剂。发现 Novozym 435 和甲苯分别是合适的生物催化剂和溶剂。然后,分别向甲苯中添加叔丁醇、正丁醇、氯仿、异丙醇、丙酮和 DMSO,以提高产物转化率。结果表明,甲苯/氯仿可以显著提高转化率,甲苯和氯仿的最佳组合为 90:10(v/v)。生成的用于 FLPs 生产的最佳条件为底物摩尔比为 5:1(PC/EF),PC 的水解时间为 1.5h,酶用量为 60mg/ml,溶剂用量为 5ml,分子筛浓度(4Å)为 100mg/ml。在此条件下,40.51%的 EF 可以转化为 FLPs,通过 TLC 和 HPLC-MS 进行了鉴定。