Cho Han Saem, Jang Sun-Joo, Kim Kyunghun, Dan-Chin-Yu Alexey V, Shishkov Milen, Bouma Brett E, Oh Wang-Yuhl
Department of Mechanical Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701, South Korea.
Department of Mechanical Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701, South Korea ; Graduate School of Medical Science and Engineering, KAIST, 291 Daehak-ro, Yuseong-gu, Daejeon 305-701, South Korea.
Biomed Opt Express. 2013 Dec 16;5(1):223-32. doi: 10.1364/BOE.5.000223.
Intravascular optical frequency-domain imaging (OFDI), a second-generation optical coherence tomography (OCT) technology, enables imaging of the three-dimensional (3D) microstructure of the vessel wall following a short and nonocclusive clear liquid flush. Although 3D vascular visualization provides a greater appreciation of the vessel wall and intraluminal structures, a longitudinal imaging pitch that is several times bigger than the optical imaging resolution of the system has limited true high-resolution 3D imaging, mainly due to the slow scanning speed of previous imaging catheters. Here, we demonstrate high frame-rate intravascular OFDI in vivo, acquiring images at a rate of 350 frames per second. A custom-built, high-speed, and high-precision fiber-optic rotary junction provided uniform and high-speed beam scanning through a custom-made imaging catheter with an outer diameter of 0.87 mm. A 47-mm-long rabbit aorta was imaged in 3.7 seconds after a short contrast agent flush. The longitudinal imaging pitch was 34 μm, comparable to the transverse imaging resolution of the system. Three-dimensional volume-rendering showed greatly enhanced visualization of tissue microstructure and stent struts relative to what is provided by conventional intravascular imaging speeds.
血管内光学频域成像(OFDI)是第二代光学相干断层扫描(OCT)技术,在进行短暂的非阻塞性清液冲洗后,能够对血管壁的三维(3D)微观结构进行成像。尽管三维血管可视化能让人更好地了解血管壁和管腔内结构,但纵向成像间距比系统的光学成像分辨率大几倍,这限制了真正的高分辨率三维成像,主要原因是先前成像导管的扫描速度较慢。在此,我们展示了体内高帧率血管内OFDI,以每秒350帧的速度采集图像。定制的高速高精度光纤旋转接头通过外径为0.87毫米的定制成像导管提供均匀且高速的光束扫描。在短暂注入造影剂冲洗后,对一条47毫米长的兔主动脉在3.7秒内进行了成像。纵向成像间距为34微米,与系统的横向成像分辨率相当。三维容积再现显示,相对于传统血管内成像速度所提供的图像,组织微观结构和支架支柱的可视化效果有了极大增强。