College of Electronics and Information, Kwangwoon University, Nowon-gu, Seoul 139-701, South Korea.
Nanoscale Res Lett. 2014 Mar 12;9(1):113. doi: 10.1186/1556-276X-9-113.
In this paper, the systematic evolution process of self-assembled Au droplets is successfully demonstrated on GaAs (111)A, (110), (100), and (111)B. On various GaAs substrates, self-assembled Au clusters begin to nucleate at around 300°C, and then, they develop into wiggly Au nanostructures at 350°C. Between 400°C and 550°C, the self-assembled dome-shaped Au droplets with fine uniformity are fabricated with various sizes and densities based on the Volmer-Weber growth mode. Depending on the annealing temperature, the size including the average height and lateral diameter and the density of Au droplets show the opposite trend of increased size with correspondingly decreased density as a function of the annealing temperature due to the difference in the diffusion length of adatoms at varied activation energy. Under an identical growth condition, depending on the surface index, the size and density of Au droplets show a clear distinction, observed throughout the temperature range. The results are systematically analyzed and discussed in terms of atomic force microscopy (AFM) images, cross-sectional line profiles, and Fourier filter transform (FFT) power spectra as well as the summary plots of the size and density.
本文成功地展示了自组装 Au 液滴在 GaAs(111)A、(110)、(100)和(111)B 上的系统演化过程。在各种 GaAs 衬底上,自组装 Au 团簇在 300°C 左右开始成核,然后在 350°C 下发展成波纹状的 Au 纳米结构。在 400°C 到 550°C 之间,基于范尔默-韦伯生长模式,制备出具有不同尺寸和密度的具有良好均匀性的自组装圆顶状 Au 液滴。取决于退火温度,Au 液滴的尺寸(包括平均高度和横向直径)和密度表现出相反的趋势,随着退火温度的升高,尺寸增大,而密度减小,这是由于在不同激活能下,吸附原子的扩散长度不同所致。在相同的生长条件下,取决于表面指数,Au 液滴的尺寸和密度在整个温度范围内都有明显的区别。通过原子力显微镜(AFM)图像、截面线轮廓、傅里叶滤波器变换(FFT)功率谱以及尺寸和密度的总结图,对结果进行了系统的分析和讨论。