使用呼吸门控深吸气屏气技术,通过三维表面替代物提高左乳放疗中分次内靶区位置准确性。

Improving intra-fractional target position accuracy using a 3D surface surrogate for left breast irradiation using the respiratory-gated deep-inspiration breath-hold technique.

作者信息

Rong Yi, Walston Steve, Welliver Meng Xu, Chakravarti Arnab, Quick Allison M

机构信息

Department of Radiation Oncology, The Ohio State University Wexner Medical Center, The James Cancer Hospital, Columbus, Ohio, United States of America.

出版信息

PLoS One. 2014 May 22;9(5):e97933. doi: 10.1371/journal.pone.0097933. eCollection 2014.

Abstract

PURPOSE

To evaluate the use of 3D optical surface imaging as a surrogate for respiratory gated deep-inspiration breath-hold (DIBH) for left breast irradiation.

MATERIAL AND METHODS

Patients with left-sided breast cancer treated with lumpectomy or mastectomy were selected as candidates for DIBH treatment for their external beam radiation therapy. Treatment plans were created on both free breathing (FB) and DIBH computed tomography (CT) simulation scans to determine dosimetric benefits from DIBH. The Real-time Position Management (RPM) system was used to acquire patient's breathing trace during DIBH CT acquisition and treatment delivery. The reference 3D surface models from FB and DIBH CT scans were generated and transferred to the "AlignRT" system for patient positioning and real-time treatment monitoring. MV Cine images were acquired during treatment for each beam as quality assurance for intra-fractional position verification. The chest wall excursions measured on these images were used to define the actual target position during treatment, and to investigate the accuracy and reproducibility of RPM and AlignRT.

RESULTS

Reduction in heart dose can be achieved using DIBH for left breast/chest wall radiation. RPM was shown to have inferior correlation with the actual target position, as determined by the MV Cine imaging. Therefore, RPM alone may not be an adequate surrogate in defining the breath-hold level. Alternatively, the AlignRT surface imaging demonstrated a superior correlation with the actual target positioning during DIBH. Both the vertical and magnitude real-time deltas (RTDs) reported by AlignRT can be used as the gating parameter, with a recommended threshold of ±3 mm and 5 mm, respectively.

CONCLUSION

The RPM system alone may not be sufficient for the required level of accuracy in left-sided breast/CW DIBH treatments. The 3D surface imaging can be used to ensure patient setup and monitor inter- and intra- fractional motions. Furthermore, the target position accuracy during DIBH treatment can be improved by AlignRT as a superior surrogate, in addition to the RPM system.

摘要

目的

评估使用三维光学表面成像作为左侧乳腺癌放疗中呼吸门控深吸气屏气(DIBH)的替代方法。

材料与方法

选择接受保乳手术或乳房切除术治疗的左侧乳腺癌患者作为其外照射放疗中DIBH治疗的候选者。在自由呼吸(FB)和DIBH计算机断层扫描(CT)模拟扫描上制定治疗计划,以确定DIBH带来的剂量学益处。在DIBH CT采集和治疗过程中,使用实时位置管理(RPM)系统获取患者的呼吸轨迹。从FB和DIBH CT扫描生成参考三维表面模型,并将其传输到“AlignRT”系统用于患者定位和实时治疗监测。在每次治疗期间采集兆伏级电影图像作为分次内位置验证的质量保证。在这些图像上测量的胸壁偏移用于确定治疗期间的实际靶区位置,并研究RPM和AlignRT的准确性和可重复性。

结果

使用DIBH进行左侧乳房/胸壁放疗可降低心脏剂量。如通过兆伏级电影成像所确定的,RPM与实际靶区位置的相关性较差。因此,仅RPM可能不足以替代确定屏气水平。相比之下,AlignRT表面成像在DIBH期间与实际靶区定位具有更好的相关性。AlignRT报告的垂直和幅度实时偏差(RTD)均可用作门控参数,建议阈值分别为±3毫米和5毫米。

结论

仅RPM系统可能不足以满足左侧乳房/CW DIBH治疗所需的精度水平。三维表面成像可用于确保患者摆位并监测分次间和分次内的运动。此外,除了RPM系统外,AlignRT作为一种更好的替代方法,可提高DIBH治疗期间靶区位置的准确性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/fdd4/4031138/6501e0c15a5b/pone.0097933.g001.jpg

相似文献

引用本文的文献

本文引用的文献

[10]
[Radiation-related heart toxicity].

Cancer Radiother. 2011-10

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索