Suppr超能文献

逼近 K 边缘:100、80 和 70kV 时冠状动脉 CT 血管造影——第二代与第三代双源 CT 系统的初步比较。

Closing in on the K edge: coronary CT angiography at 100, 80, and 70 kV-initial comparison of a second- versus a third-generation dual-source CT system.

机构信息

From the Institute of Clinical Radiology and Nuclear Medicine (M.M., H.H., S.S., S.O.S., T.H.) and 1st Department of Medicine (R.L., M.B.), University Medical Center Mannheim, Medical Faculty Mannheim-Heidelberg University, Theodor-Kutzer-Ufer 1-3, 68167 Mannheim, Germany; Department of Radiology and Radiological Science, Medical University of South Carolina, Charleston, SC (U.J.S.); Center for Medical Imaging-North East Netherlands, University of Groningen, University Medical Center Groningen, Groningen, the Netherlands (R.V.); and Imaging and Therapy Division, Siemens Healthcare, Forchheim, Germany (C.L., T.A.).

出版信息

Radiology. 2014 Nov;273(2):373-82. doi: 10.1148/radiol.14140244. Epub 2014 May 31.

Abstract

PURPOSE

To prospectively evaluate radiation and contrast medium requirements for performing high-pitch coronary computed tomographic (CT) angiography at 70 kV using a third-generation dual-source CT system in comparison to a second-generation dual-source CT system.

MATERIALS AND METHODS

All patients gave informed consent for this institutional review board-approved study. Forty-five patients (median age, 52 years; 27 men) were imaged in high-pitch mode with a third-generation dual-source CT system at 70 kV (n = 15) or with a second-generation dual-source CT system at 80 or 100 kV (n = 15 for each). Tube voltage was based on body mass index: 80 or 70 kV for less than 26 kg/m(2) versus 100 kV for 26-30 kg/m(2). For the 80- and 100-kV protocols, 80 mL of contrast material was injected, versus 45 mL for the 70-kV protocol. Data were reconstructed by using a second-generation iterative reconstruction algorithm for second-generation dual-source CT and a recently introduced third-generation iterative reconstruction algorithm for third-generation dual-source CT. Objective image quality was measured for various regions of interest, and subjective image quality was evaluated with a five-point Likert scale.

RESULTS

The signal-to-noise ratio of the coronary CT angiography studies acquired with 70 kV was significantly higher (70 kV: 14.3-17.6 vs 80 kV: 7.1-12.9 vs 100 kV: 9.8-12.9; P < .0497) than those acquired with the other two protocols for all coronary arteries. Qualitative image quality analyses revealed no significant differences between the three CT angiography protocols (median score, 5; P > .05). The mean effective dose was 75% and 108% higher (0.92 mSv ± 0.3 [standard deviation] and 0.78 mSv ± 0.2 vs 0.44 mSv ± 0.1; P < .0001), respectively, for the 80- and 100-kV CT angiography protocols than for the 70-kV CT angiography protocol.

CONCLUSION

In nonobese patients, third-generation high-pitch coronary dual-source CT angiography at 70 kV results in robust image quality for studying the coronary arteries, at significantly reduced radiation dose (0.44 mSv) and contrast medium volume (45 mL), thus enabling substantial radiation dose and contrast medium savings as compared with second-generation dual-source CT.

摘要

目的

前瞻性地评估第三代双源 CT 系统以 70kV 行高心率冠状动脉 CT 血管造影术的辐射和对比剂用量,并与第二代双源 CT 系统进行比较。

材料与方法

所有患者均对这项经机构审查委员会批准的研究签署了知情同意书。45 名患者(中位年龄 52 岁;27 名男性)分别在第三代双源 CT 系统(管电压 70kV,n=15)或第二代双源 CT 系统(管电压 80kV 或 100kV,n=15/组)上行高心率模式冠状动脉 CT 血管造影术。基于体质量指数选择管电压:体质量指数<26kg/m²者采用 80kV 或 70kV,体质量指数 26-30kg/m²者采用 100kV。80kV 和 100kV 组注射 80mL 对比剂,70kV 组注射 45mL。第二代双源 CT 采用第二代迭代重建算法,第三代双源 CT 采用最近推出的第三代迭代重建算法进行数据重建。对不同感兴趣区进行客观图像质量测量,采用 5 分制 Likert 量表评估主观图像质量。

结果

70kV 组冠状动脉 CT 血管造影术的信噪比明显高于其他两组(70kV:7.1-12.9;80kV:7.1-12.9;100kV:9.8-12.9;P<0.0497)。定性图像质量分析显示,三组 CT 血管造影术之间无显著差异(中位数评分 5 分;P>0.05)。80kV 和 100kV CT 血管造影术的平均有效剂量分别比 70kV CT 血管造影术高 75%和 108%(0.92mSv±0.3[标准差]和 0.78mSv±0.2 比 0.44mSv±0.1;P<0.0001)。

结论

在非肥胖患者中,第三代双源 CT 行 70kV 高心率冠状动脉 CT 血管造影术可获得优质的冠状动脉图像,辐射剂量(0.44mSv)和对比剂用量(45mL)明显降低,与第二代双源 CT 相比,可显著降低辐射剂量和对比剂用量。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验