College of Resource and Environment, University of Chinese Academy of Sciences, Beijing 100049, China; State Key Joint Laboratory of Environmental Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing 100084, China.
State Key Laboratory of Environmental Criteria and Risk Assessment, Chinese Research Academy of Environmental Sciences, Beijing 100012, China.
Sci Total Environ. 2014 Sep 15;493:262-70. doi: 10.1016/j.scitotenv.2014.05.147. Epub 2014 Jun 18.
Foshan is a ceramics manufacturing center in the world and the most polluted city in the Pearl River Delta (PRD) in southern China measured by the levels of atmospheric heavy metals. PM2.5 samples were collected in Foshan in winter 2008. Among the 22 elements and ions analyzed, 7 heavy metals (Zn, V, Mn, Cu, As, Cd and Pb) were studied in depth for their levels, spatiotemporal variations and sources. The ambient concentrations of the heavy metals were much higher than the reported average concentrations in China. The levels of Pb (675.7 ± 378.5 ng/m(3)), As (76.6 ± 49.1 ng/m(3)) and Cd (42.6 ± 45.2 ng/m(3)) exceeded the reference values of NAAQS (GB3095-2012) and the health guidelines of the World Health Organization. Generally, the levels of atmospheric heavy metals showed spatial distribution as: downtown site (CC, Chancheng District)>urban sites (NH and SD, Nanhai and Shunde Districts)>rural site (SS, Shanshui District). Two sources of heavy metals, the ceramic and aluminum industries, were identified during the sampling period. The large number of ceramic manufactures was responsible for the high levels of atmospheric Zn, Pb and As in Chancheng District. Transport from an aluminum industry park under light north-west winds contributed high levels of Cd to the SS site (Shanshui District). The average concentration of Cd under north-west wind was 220 ng/m(3), 20.5 times higher than those under other wind directions. The high daily maximum enrichment factors (EFs) of Cd, Pb, Zn, As and Cu at all four sites indicated extremely high contamination by local emissions. Back trajectory analysis showed that the heavy metals were also closely associated with the pathway of air mass. A positive matrix factorization (PMF) method was applied to determine the source apportionment of these heavy metals. Five factors (industry including the ceramic industry and coal combustion, vehicle emissions, dust, transportation and sea salt) were identified and industry was the most important source of atmospheric heavy metals. The present paper suggests a control policy on the four heavy metals Cd, Pb, Zn, and Cu, and suggests the inclusion of As in the ceramic industry emission standard in the future.
佛山是世界陶瓷制造业中心,也是中国南方珠江三角洲(PRD)污染最严重的城市,大气重金属水平就是一个衡量标准。2008 年冬季在佛山采集了 PM2.5 样本。在所分析的 22 种元素和离子中,对 7 种重金属(Zn、V、Mn、Cu、As、Cd 和 Pb)进行了深入研究,以了解其水平、时空变化和来源。重金属的环境浓度远高于中国报告的平均浓度。Pb(675.7 ± 378.5 ng/m(3))、As(76.6 ± 49.1 ng/m(3))和 Cd(42.6 ± 45.2 ng/m(3))的含量超过了 NAAQS(GB3095-2012)和世界卫生组织的健康指导值。一般来说,大气重金属的水平表现出空间分布:市中心(CC,禅城区)>城区(NH 和 SD,南海区和顺德区)>农村(SS,山水区)。在采样期间,确定了重金属的两个来源,陶瓷和铝工业。大量的陶瓷生产厂是禅城区大气中 Zn、Pb 和 As 含量高的原因。在轻西北风中从一个铝工业园输送的 Cd 对 SS 点(山水区)有高贡献。在西北风中,Cd 的平均浓度为 220 ng/m(3),是其他风向的 20.5 倍。四个地点的 Cd、Pb、Zn、As 和 Cu 的平均日最大富集因子(EF)表明,当地排放物造成了极高的污染。后向轨迹分析表明,重金属也与大气团的路径密切相关。应用正定矩阵因子分解(PMF)方法确定这些重金属的源分配。确定了五个因素(包括陶瓷工业和煤炭燃烧、车辆排放、粉尘、运输和海盐的工业),工业是大气重金属的最重要来源。本文提出了对 Cd、Pb、Zn 和 Cu 四种重金属的控制政策,并建议在未来将 As 纳入陶瓷工业排放标准。