Suppr超能文献

左肺动脉吊带患者气管和主支气管气流的计算流体动力学模拟

Computational fluid dynamics simulation of airflow in the trachea and main bronchi for the subjects with left pulmonary artery sling.

作者信息

Qi Shouliang, Li Zhenghua, Yue Yong, van Triest Han J W, Kang Yan

机构信息

Sino-Dutch Biomedical and Information Engineering School, Northeastern University, Shenyang, China.

出版信息

Biomed Eng Online. 2014 Jun 24;13:85. doi: 10.1186/1475-925X-13-85.

Abstract

BACKGROUND

Left pulmonary artery sling (LPAS) is a rare but severe congenital anomaly, in which the stenoses are formed in the trachea and/or main bronchi. Multi-detector computed tomography (MDCT) provides useful anatomical images, but does not offer functional information. The objective of the present study is to quantitatively analyze the airflow in the trachea and main bronchi of LPAS subjects through computational fluid dynamics (CFD) simulation.

METHODS

Five subjects (four LPAS patients, one normal control) aging 6-19 months are analyzed. The geometric model of the trachea and the two main bronchi is extracted from the MDCT images. The inlet velocity is determined based on the body weight and the inlet area. Both the geometric model and personalized inflow conditions are imported into CFD software, ANSYS. The pressure drop, mass flow ratio through two bronchi, wall pressure, flow velocity and wall shear stress (WSS) are obtained, and compared to the normal control.

RESULTS

Due to the tracheal and/or bronchial stenosis, the pressure drop for the LPAS patients ranges 78.9-914.5 Pa, much higher than for the normal control (0.7 Pa). The mass flow ratio through the two bronchi does not correlate with the sectional area ratio if the anomalous left pulmonary artery compresses the trachea or bronchi. It is suggested that the C-shaped trachea plays an important role on facilitating the air flow into the left bronchus with the inertia force. For LPAS subjects, the distributions of velocities, wall pressure and WSS are less regular than for the normal control. At the stenotic site, high velocity, low wall pressure and high WSS are observed.

CONCLUSIONS

Using geometric models extracted from CT images and the patient-specified inlet boundary conditions, CFD simulation can provide vital quantitative flow information for LPAS. Due to the stenosis, high pressure drops, inconsistent distributions of velocities, wall pressure and WSS are observed. The C-shaped trachea may facilitate a larger flow of air into the left bronchus under the inertial force, and decrease the ventilation of the right lung. Quantitative and personalized information may help understand the mechanism of LPAS and the correlations between stenosis and dyspnea, and facilitate the structural and functional assessment of LPAS.

摘要

背景

左肺动脉吊带(LPAS)是一种罕见但严重的先天性异常,其中气管和/或主支气管会形成狭窄。多排螺旋计算机断层扫描(MDCT)可提供有用的解剖图像,但无法提供功能信息。本研究的目的是通过计算流体动力学(CFD)模拟对LPAS患者气管和主支气管内的气流进行定量分析。

方法

分析了5名年龄在6至19个月的受试者(4名LPAS患者,1名正常对照)。从MDCT图像中提取气管和两个主支气管的几何模型。根据体重和入口面积确定入口速度。将几何模型和个性化的流入条件导入CFD软件ANSYS。获得压降、通过两个支气管的质量流量比、壁面压力、流速和壁面剪切应力(WSS),并与正常对照进行比较。

结果

由于气管和/或支气管狭窄,LPAS患者的压降范围为78.9 - 914.5 Pa,远高于正常对照(0.7 Pa)。如果异常的左肺动脉压迫气管或支气管,通过两个支气管的质量流量比与截面积比不相关。提示C形气管在借助惯性力促进空气流入左支气管方面起重要作用。对于LPAS受试者,速度、壁面压力和WSS的分布比正常对照更不规则。在狭窄部位,观察到高流速、低壁面压力和高WSS。

结论

利用从CT图像中提取的几何模型和患者特定的入口边界条件,CFD模拟可为LPAS提供重要的定量流动信息。由于狭窄,观察到高压降、速度、壁面压力和WSS分布不一致。C形气管可能在惯性力作用下促进更多空气流入左支气管,并减少右肺的通气。定量和个性化信息有助于了解LPAS的机制以及狭窄与呼吸困难之间的关系,并有助于对LPAS进行结构和功能评估。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/136e/4079174/041b8ab06625/1475-925X-13-85-1.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验