Acoustic MedSystems Inc., Savoy, IL, USA Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, IL, USA.
Department of Electrical and Computer Engineering, University of Illinois at Urbana-Champaign, Urbana, IL, USA.
Ultrason Imaging. 2014 Oct;36(4):239-55. doi: 10.1177/0161734614524179. Epub 2014 Jun 26.
Quantitative ultrasound (QUS) imaging is hypothesized to map temperature elevations induced in tissue with high spatial and temporal resolution. To test this hypothesis, QUS techniques were examined to monitor high-intensity focused ultrasound (HIFU) exposure of tissue. In situ experiments were conducted on mammary adenocarcinoma tumors grown in rats and lesions were formed using a HIFU system. A thermocouple was inserted into the tumor to provide estimates of temperature at one location. Backscattered time-domain waveforms from the tissue during exposure were recorded using a clinical ultrasonic imaging system. Backscatter coefficients were estimated using a reference phantom technique. Two parameters were estimated from the backscatter coefficient (effective scatterer diameter (ESD) and effective acoustic concentration (EAC). The changes in the average parameters in the regions corresponding to the HIFU focus over time were correlated to the temperature readings from the thermocouple. The changes in the EAC parameter were consistently correlated to temperature during both heating and cooling of the tumors. The changes in the ESD did not have a consistent trend with temperature. The mean ESD and EAC before exposure were 120 ± 16 μm and 32 ± 3 dB/cm3, respectively, and changed to 144 ± 9 μm and 51 ± 7 dB/cm3, respectively, just before the last HIFU pulse was delivered to the tissue. After the tissue cooled down to 37 °C, the mean ESD and EAC were 126 ± 8 μm and 35 ± 4 dB/cm3, respectively. Peak temperature in the range of 50-60 °C was recorded by a thermocouple placed just behind the tumor. These results suggest that QUS techniques have the potential to be used for non-invasive monitoring of HIFU exposure.
定量超声(QUS)成像是假设以高空间和时间分辨率绘制组织中诱导的温度升高。为了检验这一假设,研究了 QUS 技术以监测高强度聚焦超声(HIFU)对组织的暴露。在大鼠生长的乳腺腺癌肿瘤上进行了原位实验,并使用 HIFU 系统形成了病变。将热电偶插入肿瘤中,以提供一个位置的温度估计。使用临床超声成像系统记录组织在暴露过程中的背散射时域波形。使用参考体模技术估计背散射系数。从背散射系数估计了两个参数(有效散射体直径(ESD)和有效声浓度(EAC)。与热电偶的温度读数相关的是,在与 HIFU 焦点对应的区域中随时间变化的平均参数的变化。在加热和冷却肿瘤期间,EAC 参数的变化与温度一直保持相关。ESD 的变化与温度没有一致的趋势。暴露前 ESD 和 EAC 的平均值分别为 120 ± 16 μm 和 32 ± 3 dB/cm3,分别变为 144 ± 9 μm 和 51 ± 7 dB/cm3,就在最后一次 HIFU 脉冲传递到组织之前。组织冷却至 37°C 后,ESD 和 EAC 的平均值分别为 126 ± 8 μm 和 35 ± 4 dB/cm3。放置在肿瘤后面的热电偶记录了 50-60°C 范围内的峰值温度。这些结果表明,QUS 技术有可能用于非侵入性监测 HIFU 暴露。