Dai Xiaorong, Karring Henrik
Department of Chemical Engineering, Biotechnology and Environmental Technology, University of Southern Denmark, Odense, Denmark.
PLoS One. 2014 Nov 14;9(11):e110402. doi: 10.1371/journal.pone.0110402. eCollection 2014.
Ammonia emission from animal production is a major environmental problem and has impacts on the animal health and working environment inside production houses. Ammonia is formed in manure by the enzymatic degradation of urinary urea and catalyzed by urease that is present in feces. We have determined and compared the urease activity in feces and manure (a urine and feces mixture) from pigs and cattle at 25°C by using Michaelis-Menten kinetics. To obtain accurate estimates of kinetic parameters Vmax and K'm, we used a 5 min reaction time to determine the initial reaction velocities based on total ammoniacal nitrogen (TAN) concentrations. The resulting Vmax value (mmol urea hydrolyzed per kg wet feces per min) was 2.06±0.08 mmol urea/kg/min and 0.80±0.04 mmol urea/kg/min for pig feces and cattle feces, respectively. The K'm values were 32.59±5.65 mmol urea/l and 15.43±2.94 mmol urea/l for pig feces and cattle feces, respectively. Thus, our results reveal that both the Vmax and K'm values of the urease activity for pig feces are more than 2-fold higher than those for cattle feces. The difference in urea hydrolysis rates between animal species is even more significant in fresh manure. The initial velocities of TAN formation are 1.53 mM/min and 0.33 mM/min for pig and cattle manure, respectively. Furthermore, our investigation shows that the maximum urease activity for pig feces occurs at approximately pH 7, and in cattle feces it is closer to pH 8, indicating that the predominant fecal ureolytic bacteria species differ between animal species. We believe that our study contributes to a better understanding of the urea hydrolysis process in manure and provides a basis for more accurate and animal-specific prediction models for urea hydrolysis rates and ammonia concentration in manures and thus can be used to predict ammonia volatilization rates from animal production.
动物生产过程中的氨排放是一个重大的环境问题,对动物健康以及养殖场内的工作环境都会产生影响。氨是由粪便中存在的脲酶催化,通过尿液中尿素的酶促降解在粪便中形成的。我们运用米氏动力学,在25°C的条件下测定并比较了猪和牛的粪便以及粪肥(尿液和粪便的混合物)中的脲酶活性。为了准确估算动力学参数Vmax和K'm,我们采用5分钟的反应时间,根据总氨氮(TAN)浓度来测定初始反应速度。猪粪便和牛粪便的Vmax值(每千克湿粪便每分钟水解的尿素毫摩尔数)分别为2.06±0.08毫摩尔尿素/千克/分钟和0.80±0.04毫摩尔尿素/千克/分钟。猪粪便和牛粪便的K'm值分别为32.59±5.65毫摩尔尿素/升和15.43±2.94毫摩尔尿素/升。因此,我们的研究结果表明,猪粪便脲酶活性的Vmax和K'm值均比牛粪便高出两倍多。动物种类之间尿素水解速率的差异在新鲜粪肥中更为显著。猪粪和牛粪中TAN形成的初始速度分别为1.53毫摩尔/分钟和0.33毫摩尔/分钟。此外,我们的研究表明,猪粪便的脲酶最大活性出现在pH值约为7时,而牛粪便的脲酶最大活性更接近pH值8,这表明不同动物种类中主要的粪便尿素分解细菌种类存在差异。我们相信,我们的研究有助于更好地理解粪便中的尿素水解过程,并为更准确的、针对动物种类的粪便尿素水解速率和氨浓度预测模型提供依据,从而可用于预测动物生产过程中的氨挥发速率。