Jun Changsu, Villiger Martin, Oh Wang-Yuhl, Bouma Brett E
Opt Express. 2014 Oct 20;22(21):25805-14. doi: 10.1364/OE.22.025805.
Innovations in laser engineering have yielded several novel configurations for high repetition rate, broad sweep range, and long coherence length wavelength swept lasers. Although these lasers have enabled high performance frequency-domain optical coherence tomography, they are typically complicated and costly and many require access to proprietary materials or devices. Here, we demonstrate a simplified ring resonator configuration that is straightforward to construct from readily available materials at a low total cost. It was enabled by an insight regarding the significance of isolation against bidirectional operation and by configuring the sweep range of the intracavity filter to exceed its free spectral range. The design can easily be optimized to meet a range of operating specifications while yielding robust and stable performance. As an example, we demonstrate 240 kHz operation with 125 nm sweep range and >70 mW of average output power and demonstrate high quality frequency domain OCT imaging. The complete component list and directions for assembly of the laser are posted on-line at www.octresearch.org.
激光工程领域的创新成果带来了几种新颖的配置,用于高重复率、宽扫描范围和长相干长度的波长扫描激光器。尽管这些激光器已实现了高性能的频域光学相干断层扫描,但它们通常复杂且昂贵,许多还需要使用专有材料或器件。在此,我们展示了一种简化的环形谐振器配置,它使用现成材料以较低的总成本即可轻松构建。这是通过对双向操作隔离的重要性的深刻理解以及将腔内滤波器的扫描范围配置为超过其自由光谱范围而实现的。该设计可以轻松优化以满足一系列操作规范,同时实现稳健且稳定的性能。例如,我们展示了在125nm扫描范围内240kHz的运行频率以及平均输出功率大于70mW的情况,并展示了高质量的频域OCT成像。激光器的完整组件清单和组装说明已发布在www.octresearch.org上。