Centre for Nanomaterials, Advanced Technologies and Innovations, Studentska 1402/2, 461 17 Liberec 1, Czech Republic.
Centre for Nanomaterials, Advanced Technologies and Innovations, Studentska 1402/2, 461 17 Liberec 1, Czech Republic.
Mater Sci Eng C Mater Biol Appl. 2013 Jan 1;33(1):265-73. doi: 10.1016/j.msec.2012.08.039. Epub 2012 Sep 6.
Epidemics spread many types of pathogenic bacterial strains, especially strains of MRSA (Methicillin-resistant Staphylococcus aureus), which are being increasingly reported in many geographical areas [1]. This is becoming to be a serious global problem, particularly in hospitals. Not only are antibiotics proving to be increasingly ineffective but also the bacteria responsible for more than 70% of hospital-acquired bacterial infections are resistant to at least one of the drugs commonly used to treat them. In this study, hybrid coating A1 and nanocomposite hybrid coating A2 based on TMSPM (3-(trimethoxysilyl)propyl methacrylate, MMA (methyl methacrylate), TEOS (tetraethyl orthosilicate) and IPTI (titanium isopropoxide) containing silver and copper ions with or without nanoparticles of titanium dioxide were prepared by the sol-gel method. They were deposited on glass, poly(methyl methacrylate) and cotton using dip-coating or spin-coating, and then cured at 150 °C for 3 h or, in the case of poly(methyl methacrylate), at 100 °C for 4.5 h. The morphology and microstructure of these hybrid coatings were examined by SEM. The abrasion resistance was tested using a washability tester and found to depend heavily on the curing temperature. Seven types of bacterial strains were used to determine the profile of antibacterial activity, namely Escherichia coli, Staphylococcus aureus, Methicillin-resistant Staphylococcus aureus - MRSA (CCM 4223), MRSA-2 (CCM 7112), Acinetobacter baumanii, Pseudomonas aeruginosa, and Proteus vulgaris (according to ALE-G18, CSNI). All the samples were tested by irradiating with either a UV-A or a daylight fluorescent lamp. All types of hybrid coating A1 and nanocomposite hybrid coating A2 were found to possess an excellent antibacterial effect, including against the pathogenic bacterial strains of MRSA, which present a dangerous threat on a global scale.
流行疾病传播了多种病原菌株,尤其是耐甲氧西林金黄色葡萄球菌(MRSA),这种细菌在许多地理区域的报道越来越多[1]。这正在成为一个严重的全球性问题,特别是在医院中。不仅抗生素的效果越来越差,而且导致 70%以上医院获得性细菌感染的细菌对至少一种常用药物具有耐药性。在这项研究中,通过溶胶-凝胶法制备了基于 TMSPM(3-(三甲氧基硅基)丙基甲基丙烯酸酯、MMA(甲基丙烯酸甲酯)、TEOS(正硅酸乙酯)和 IPTI(钛异丙醇)的混合涂层 A1 和纳米复合混合涂层 A2,含有银和铜离子,以及或不含有纳米二氧化钛的颗粒。使用浸涂或旋涂将其沉积在玻璃、聚甲基丙烯酸甲酯和棉上,然后在 150°C 下固化 3 小时,或在聚甲基丙烯酸甲酯的情况下在 100°C 下固化 4.5 小时。通过 SEM 检查这些混合涂层的形貌和微观结构。使用洗涤性测试仪测试耐磨性,发现耐磨性严重依赖于固化温度。使用七种细菌菌株来确定抗菌活性谱,即大肠杆菌、金黄色葡萄球菌、耐甲氧西林金黄色葡萄球菌-MRSA(CCM 4223)、MRSA-2(CCM 7112)、鲍曼不动杆菌、铜绿假单胞菌和普通变形杆菌(根据 ALE-G18、CSNI)。所有样品均通过用 UV-A 或日光荧光灯照射进行测试。发现所有类型的混合涂层 A1 和纳米复合混合涂层 A2 都具有出色的抗菌效果,包括针对具有全球危险威胁的 MRSA 病原菌株。