Makarov Dmitrii E
Department of Chemistry and Institute for Computational Engineering and Sciences, University of Texas at Austin, Austin, Texas 78712, USA.
J Chem Phys. 2014 Dec 28;141(24):241103. doi: 10.1063/1.4904895.
In single-molecule pulling experiments, the molecule of interest is attached to a much larger object such as an atomic force microscope tip or a micrometer sized bead. The measured dynamics of molecular transitions is therefore affected by the hydrodynamic drag on the pulling instrument itself. By considering the transitions within the combined system (the molecule and the instrument), it is shown here that two distinct physical regimes exist: when the intrinsic stiffness of the molecule is greater than that of the linker connecting the molecule to the pulling setup then the pulling experiment probes the intrinsic dynamics of the molecule with only relatively small (and quantifiable) corrections resulting from the pulling setup. In contrast, when the stiffness of the linker exceeds that of the molecule, the molecular transition in question involves concerted motion of the molecule and the pulling setup and the hydrodynamic drag on the pulling instrument becomes the dominant source of friction along the molecular reaction coordinate. An analytical formula interpolating between these two cases is further derived. These results explain recent conflicting observations where some single-molecule pulling measurements report anomalously low diffusion coefficients along molecular reaction coordinates while others do not.
在单分子拉伸实验中,感兴趣的分子被连接到一个大得多的物体上,比如原子力显微镜探针或微米尺寸的珠子。因此,所测量的分子跃迁动力学受到拉伸仪器自身流体动力学阻力的影响。通过考虑组合系统(分子和仪器)内的跃迁,本文表明存在两种不同的物理状态:当分子的固有刚度大于将分子连接到拉伸装置的连接体的刚度时,拉伸实验探测的是分子的固有动力学,仅因拉伸装置产生相对较小(且可量化)的修正。相反,当连接体的刚度超过分子的刚度时,所讨论的分子跃迁涉及分子和拉伸装置的协同运动,并且拉伸仪器上的流体动力学阻力成为沿分子反应坐标的主要摩擦源。进一步推导了在这两种情况之间进行插值的解析公式。这些结果解释了最近相互矛盾的观测结果,即一些单分子拉伸测量报告沿分子反应坐标的扩散系数异常低,而另一些则不然。