Suppr超能文献

使用锥形束CT投影计算肿瘤轨迹和当日剂量。

Calculating tumor trajectory and dose-of-the-day using cone-beam CT projections.

作者信息

Jones Bernard L, Westerly David, Miften Moyed

机构信息

Department of Radiation Oncology, University of Colorado School of Medicine, Aurora, Colorado 80045.

出版信息

Med Phys. 2015 Feb;42(2):694-702. doi: 10.1118/1.4905107.

Abstract

PURPOSE

Cone-beam CT (CBCT) projection images provide anatomical data in real-time over several respiratory cycles, forming a comprehensive picture of tumor movement. The authors developed and validated a method which uses these projections to determine the trajectory of and dose to highly mobile tumors during each fraction of treatment.

METHODS

CBCT images of a respiration phantom were acquired, the trajectory of which mimicked a lung tumor with high amplitude (up to 2.5 cm) and hysteresis. A template-matching algorithm was used to identify the location of a steel BB in each CBCT projection, and a Gaussian probability density function for the absolute BB position was calculated which best fit the observed trajectory of the BB in the imager geometry. Two modifications of the trajectory reconstruction were investigated: first, using respiratory phase information to refine the trajectory estimation (Phase), and second, using the Monte Carlo (MC) method to sample the estimated Gaussian tumor position distribution. The accuracies of the proposed methods were evaluated by comparing the known and calculated BB trajectories in phantom-simulated clinical scenarios using abdominal tumor volumes.

RESULTS

With all methods, the mean position of the BB was determined with accuracy better than 0.1 mm, and root-mean-square trajectory errors averaged 3.8% ± 1.1% of the marker amplitude. Dosimetric calculations using Phase methods were more accurate, with mean absolute error less than 0.5%, and with error less than 1% in the highest-noise trajectory. MC-based trajectories prevent the overestimation of dose, but when viewed in an absolute sense, add a small amount of dosimetric error (<0.1%).

CONCLUSIONS

Marker trajectory and target dose-of-the-day were accurately calculated using CBCT projections. This technique provides a method to evaluate highly mobile tumors using ordinary CBCT data, and could facilitate better strategies to mitigate or compensate for motion during stereotactic body radiotherapy.

摘要

目的

锥形束CT(CBCT)投影图像可在多个呼吸周期实时提供解剖数据,形成肿瘤运动的全面图像。作者开发并验证了一种利用这些投影来确定治疗各分次期间高移动性肿瘤的轨迹和剂量的方法。

方法

获取呼吸体模的CBCT图像,其轨迹模拟具有高幅度(高达2.5厘米)和滞后现象的肺部肿瘤。使用模板匹配算法识别每个CBCT投影中钢珠的位置,并计算绝对钢珠位置的高斯概率密度函数,该函数最适合成像几何中观察到的钢珠轨迹。研究了轨迹重建的两种改进方法:第一,使用呼吸相位信息来优化轨迹估计(相位法);第二,使用蒙特卡罗(MC)方法对估计的高斯肿瘤位置分布进行采样。通过比较在使用腹部肿瘤体积的体模模拟临床场景中已知和计算的钢珠轨迹,评估所提出方法的准确性。

结果

使用所有方法,钢珠的平均位置确定精度优于0.1毫米,均方根轨迹误差平均为标记幅度的3.8%±1.1%。使用相位法的剂量计算更准确,平均绝对误差小于0.5%,在最高噪声轨迹中误差小于1%。基于MC的轨迹可防止剂量高估,但从绝对意义上看,会增加少量剂量误差(<0.1%)。

结论

使用CBCT投影可准确计算标记轨迹和当日靶区剂量。该技术提供了一种利用普通CBCT数据评估高移动性肿瘤的方法,并可促进在立体定向体部放射治疗期间更好地减轻或补偿运动的策略。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验