Brady Martin L, Raghavan Raghu, Block Walter, Grabow Benjamin, Ross Chris, Kubota Ken, Alexander Andrew L, Emborg Marina E
Therataxis, LLC, Baltimore, Md., USA.
Stereotact Funct Neurosurg. 2015;93(2):102-109. doi: 10.1159/000367665. Epub 2015 Feb 18.
Background/Aims: The distribution of infusate into the brain by convection-enhanced delivery can be affected by backflow along the catheter shaft. This work assesses the following: (1) whether tissue coring and occlusion of the catheter lumen occurs when an open end-port catheter is inserted, (2) whether there is a relationship between intracatheter pressure and backflow, and (3) whether catheter occlusion increases backflow. Methods: Freshly excised monkey brains were used to assess tissue coring and its correlation with the behavior of the line pressure. In vivo infusions of gadolinium solution into monkey putamen at 1 μl/min were conducted with and without a stylet during insertion. The effect of flow during insertion was evaluated in vivo in the pig thalamus. MRI and line pressure were continuously monitored during in vivo infusions. Results: Ex vivo testing showed that open end-port insertions always cored tissue (which temporarily plugs the catheter tip) and increased pressure followed by a rapid fall after its expulsion. Catheter insertion with a stylet in place prevented coring but not flow insertion; neither affected backflow. Conclusion: Open end-port catheters occlude during insertion, which can be prevented by temporarily closing the port with a stylet but not by infusing while inserting. Backflow was not completely prevented by any insertion method. © 2015 S. Karger AG, Basel.
背景/目的:对流增强递送过程中输注液向脑内的分布可能会受到沿导管轴的逆流影响。本研究评估以下内容:(1)插入开口端导管时是否会发生组织取芯和导管腔阻塞,(2)导管内压力与逆流之间是否存在关系,以及(3)导管阻塞是否会增加逆流。方法:使用新鲜切除的猴脑评估组织取芯及其与线压力行为的相关性。在插入过程中,有和没有导丝的情况下,以1 μl/分钟的速度向猴壳核体内输注钆溶液。在猪丘脑体内评估插入过程中血流的影响。在体内输注过程中持续监测MRI和线压力。结果:体外测试表明,开口端插入总是会取芯组织(暂时堵塞导管尖端)并增加压力,随后在组织排出后压力迅速下降。插入导丝时进行导管插入可防止取芯,但不能防止血流插入;两者均不影响逆流。结论:开口端导管在插入过程中会阻塞,可通过用导丝暂时封闭端口来防止,但不能通过插入时输注来防止。任何插入方法都不能完全防止逆流。© 2015 S. Karger AG,巴塞尔。